Hello all, I am vainly attempting to create assembly drawings for my current project. I have found two methods for creating these drawings but with unsatisfactory results.
Method 1: Within Print Preview export the drawing (Top or Bottom Overlay/Mech 1 on) without Font Substitution and Non-Enhanced WMF. Open a new blank schematic sheet and place WMF graphic. Result: Weird looking part designators. Method 2: Same as Method 1 but use Font Substitution (Verdana looks best in my opinion). Result: Beautiful looking part designators but some designators (not all) are in weird/rotated positions (not in the same places or orientation as original Print Preview document). Anybody out there have a better method or found some way around this? Start of gripe... Also, I find it odd that you can export in Enhanced WMF from Print Preview but you cannot place this file format in a schematic sheet. End of gripe... Thanks in advance, Richard Stevense Calgary, Alberta. ************************************************************************ * Tracking #: E4A620CE6DF7394E9806222E6D7A0FE51170734C * ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *