Anand,
You should not need to define any layers in the footprint file.
John

Anand Kulkarni wrote:

> Hi everybody,
>
> I have struggled with this problem for sometime now;
> I hope you can help me.
>
> I defined a PCB in Protel with 6 layers.
> The layers were named :
>
> top,midlayer1,midlayer2,midlayer29,midlayer30,bottom
>
> by default.
>
> Now I also created a footprint for a xilinx FPGA part with 6 layers in it and named 
>them the same as above.
>
> Now when I do an update of the PCB from the schematics
> only the layers
>  top,midlayer1,midlayer2 and bottom
> are  copied form the footprint to the PCB ;
> the layers
>  midlayer29 and midlayer30
> do not get copied ;
>
> I don't know what is happening ;
>
> I'd greatly appreciate any suggestions
>
> thanks and regards
>
> Anand Kulkarni
>
> ____________________________________________________________
> Watch a championship game with Elway or McGwire.
> Enter Now at http://champions.lycos.com

--
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>John M. Cardone       Electro-Mechanical Dsgn. Engr. Grp.
>M/S 278-100           Mechanical Engineering Section, 352
>4800 Oak Grove Dr.    NASA / Jet Propulsion Laboratory
>Pasadena, Ca 91109    MailTo:[EMAIL PROTECTED]
>Tel: 818.354.5407     Fax: 818.393.6400
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to