If that's true, it would definitely point the problem to Altium. I had
not noticed a relationship between the number of files open. I thought
it was related to the driver (of which I 'currently' do not have
problems)

Tony




> -----Original Message-----
> From: richard brogle [mailto:[EMAIL PROTECTED]] 
> Sent: Wednesday, November 20, 2002 4:19 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Protel Schematic - Inverted signal name 
> "NOT" bar over the text p lots very LONG and not to scale
> 
> 
> 
> 
> I have this issue all the time - I just tried Norb's 
> suggestion, and it completely solved the problem.
> 
> Thanks Norb.
> 
> Rick
> 
> -----Original Message-----
> From: Back, Norb [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, November 20, 2002 11:07 AM
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Protel Schematic - Inverted signal name 
> "NOT" bar over the text p lots very LONG and not to scale
> 
> 
> I know that if I do not have all the schematics open for the 
> project and print all the schematics the "NOT" bars are all 
> messed up, whey to long, wrong spots .... If all the 
> schematics are open it prints fine
> 
> -----Original Message-----
> From: Brooks,Bill [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, November 20, 2002 10:49 AM
> To: 'Protel EDA Forum'
> Subject: [PEDA] Protel Schematic - Inverted signal name "NOT" 
> bar over the text p lots very LONG and not to scale
> 
> 
> I have noticed that the "NOT" indicator or Bar over the 
> signal name 'feature' in Protel Schematic plots incorrectly 
> on the HP Plotter when printing my schematic. Have any of you 
> seen this before and what is causing it? How can I work 
> around this problem?
> 
> 
> Bill Brooks 
> PCB Design Engineer , C.I.D., C.I.I.
> TITAN SYSTEMS CORPORATION
> DATRON WORLD COMMUNICATIONS DIVISION
> 3030 Enterprise Court, Vista, CA 92083 
> Email: [EMAIL PROTECTED]
> Website: http://www.dtwc.com/
> Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510 
> 
> 
> 


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to