I've got a question on Wrico Pens and Linen . . . : - )
----- Original Message ----- From: "Bagotronix Tech Support" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Sent: Wednesday, July 09, 2003 7:33 AM Subject: Re: [PEDA] Protel EDA Forum... was adjacent component placement D XP > Personally, I don't mind seeing questions about DXP on this list. It's good > to know what the issues are with DXP, because it gives insight as to how > mature (or immature) DXP is, and if it's worth upgrading to. I can't answer > any DXP questions because I don't have it, but I at least want to know of > what others are suffering (or triumphing) through. > > That also goes for older versions: 98, 3.X, 2.X, Autotrax, etc. All Protel > is fair game here, IMO. And conversion issues (Orcad, PADS, etc.) too. > > Best regards, > Ivan Baggett > Bagotronix Inc. > website: www.bagotronix.com > > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Wednesday, July 09, 2003 8:56 AM > Subject: Re: [PEDA] Protel EDA Forum... was adjacent component placement D > XP > > > > > > Mr Morgan, > > > > Since when is this the "Protel 99SE" list? > > > > For your future information, this is the Protel EDA Forum, as clearly and > > explicity stated in the footer appended to each and every list message, > and > > kindly maintained by Techserv, Inc for the quasi-public dissemination of > > issues related to any and all versions of Protel EDA software, including, > > but not limited to P99SE...AND DXP. > > > > I think I speak for a portion of this list (though clearly not all) when I > > say that I would appreciate it if you would attempt to remember this > before > > spouting off erroneous garbage like the bull sheisa you post below. In any > > case, I speak for myself. > > > > Finally, I want to be clear to Dr Roberts that this is not the exclusive > > territory of P99SE users, and Dr Roberts is welcome to post queries or > > otherwise participate in this forum as she likes. > > > > As Jason indicated, there is another forum, sponsored by Altium, which is > > dedicated to DXP, but I feel the need to attempt to un-obfuscate the > > distinction between these forums. Altium's is one which is a quarantined, > > corporate sponsored list, with all of the implications that go with that > > status. Techserv's is an open user's forum for ANY and ALL Protel EDA > > products, regardless of any ignornat comments made by it's novice or jaded > > participants. > > > > thank you, > > > > Andrew Jenkins > > > > > -----Original Message----- > > > From: Jason Morgan [mailto:[EMAIL PROTECTED] > > > Sent: Wednesday, July 09, 2003 4:46 AM > > > To: 'Protel EDA Forum' > > > > > > Firstly you posted to the wrong list, this list is for Protel > > > 99se, and not > > > DXP, > > > there is a separate list for DXP issues, see > > > http://forums.altium.com/cgi-bin/msgbylist.asp?list=dxp > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
