Protel 99se can do this.

Go to Tools/Annotate and then click on the Advanced Options tab.

In this tab you can define a suffix for all sheet parts (i.e. a suffix of 10
applied to the components from 0 to 23 would give part numbers 1000 to 1023)




> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, 30 July 2003 18:45
> To: Protel EDA Forum
> Subject: [PEDA] PEDA] P99SE Annotation
> 
> 
> Hi
> 
> My company uses an internal designator naming standard for schematic 
> symbols. The standard is such that each type of component is 
> assigned a 
> prefix and each designator will be 4 digits long, eg. 1st 
> resistor: 1001, 
> 2nd resistor: 1002, 25th capacitor: 2025, 54th diode, 3054, etc. 
> 
> Is there anyway I can get P99SE to generate this automatically? I 
> understand that it can only do 11, 12, etc, and not 1001, 1002, etc. 
> Furthermore if I reset the designators, the prefix number 
> gets wiped out 
> as well.
> 
> Thanks for answering my question.
> 
> Adeline
> 
> 


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to