Adeline,

go to Tools->Annotate(untick Current Sheet Only box)->Advanced Options and set a range 
for designators on each sheet in the project. We usually set top level sheet to the 
range of 0-99 and then child sheet 1 to 100-199, child sheet 2 to 200-299, second 
level child sheet 1 to 1000-1999, second level child sheet 2 to 2000-2999, etc.

Regards,

Igor

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, 30 July 2003 6:45 PM
To: Protel EDA Forum
Subject: [PEDA] PEDA] P99SE Annotation


Hi

My company uses an internal designator naming standard for schematic 
symbols. The standard is such that each type of component is assigned a 
prefix and each designator will be 4 digits long, eg. 1st resistor: 1001, 
2nd resistor: 1002, 25th capacitor: 2025, 54th diode, 3054, etc. 

Is there anyway I can get P99SE to generate this automatically? I 
understand that it can only do 11, 12, etc, and not 1001, 1002, etc. 
Furthermore if I reset the designators, the prefix number gets wiped out 
as well.

Thanks for answering my question.

Adeline



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to