Steve, Have you tried any of the PCB manufacturers on Premiers (Protel UK distributor)web site?
http://www.eda.co.uk/servProv.html#PCBManufacturing Regards, Dave -----Original Message----- From: Stephen Casey [mailto:[EMAIL PROTECTED] Sent: 11 September 2003 12:50 To: Protel forum Subject: [PEDA] Board fabricator in UK/EU Hello, I have a requirement for a slightly unusual PCB. Does anybody (preferably in the UK) know of a fab house who could make something with these specifications?: (1) 0.3 mm thick substrate. (2) Double sided. (3) Approx 10x0.4mm dia plated through holes. (4) Small size ~6x6mm. (5) Fairly complex profiles (irregular octagonal). (6) Profile needs to be accurate to 0.05mm or so as it is used for mechanical location. (7) Initial requirement for 25 or so for evaluation going to 100s off for production. Thanks for your time. Steve. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *