> -----Original Message-----
> From: Stephen Casey [mailto:[EMAIL PROTECTED] 
> Sent: Thursday, September 11, 2003 12:50 PM
> To: Protel forum
> Subject: [PEDA] Board fabricator in UK/EU
> 
> 
> Hello,
> 
> I have a requirement for a slightly unusual PCB. Does anybody 
> (preferably in the UK) know of a fab house who could make 
> something with these
> specifications?:
> 
> (1) 0.3 mm thick substrate.
> (2) Double sided.
> (3) Approx 10x0.4mm dia plated through holes.
> (4) Small size ~6x6mm.
> (5) Fairly complex profiles (irregular octagonal).
> (6) Profile needs to be accurate to 0.05mm or so as it is 
> used for mechanical location.
> (7) Initial requirement for 25 or so for evaluation going to 
> 100s off for production.

Steve

Try http://www.ccee.co.uk

Visit capabilities page and see if what you need is there.

Contact name if you are interested is Ron Carson Tel 07803 151 150 or
email to [EMAIL PROTECTED]

Do not know where you are in UK but Ron stays in Wigan area so might be
able to visit you.

Good luck

Best Regards

John A. Ross

RSD Communications Ltd
8 BorrowMeadow Road
Springkerse Industrial Estate
Stirling, Scotland FK7 7UW

Tel     +44 [0]1786 450572 Ext 225 (Office)
Tel     +44 [0]1786 450572 Ext 248 (Lab)
Fax     +44 [0]1786 474653
GSM     +44 [0]7831 373727

Email   [EMAIL PROTECTED]
WWW     http://www.rsd.tv
==========================================
 





* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to