Thursday, September 11, 2003, 12:50:03 PM, you wrote:
> Hello, > I have a requirement for a slightly unusual PCB. Does anybody (preferably in > the UK) know of a fab house who could make something with these > specifications?: > (1) 0.3 mm thick substrate. > (2) Double sided. > (3) Approx 10x0.4mm dia plated through holes. > (4) Small size ~6x6mm. > (5) Fairly complex profiles (irregular octagonal). > (6) Profile needs to be accurate to 0.05mm or so as it is used for > mechanical location. > (7) Initial requirement for 25 or so for evaluation going to 100s off for > production. > Thanks for your time. > Steve. You could try my local place which have done things on 0.25mm board for me before, at http://www.glrprocessing.com/ They do good quality work in small batches -- David Want VVLP Electronics Ltd 47 Percival Road * Rugby * Warwickshire * CV22 5JU 01788 541790 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
