I'd like to thank all of you for the responses - I've passed them to the
designer, and I'll let those of you who requested it know when we find
somebody capable of this job.

Thanks again - It's been a big help.

Steve.

> -----Original Message-----
> From: David Want [mailto:[EMAIL PROTECTED]
> Sent: 12 September 2003 20:16
> To: Protel EDA Forum
> Subject: Re: [PEDA] Board fabricator in UK/EU
>
>
>
>
> Thursday, September 11, 2003, 12:50:03 PM, you wrote:
>
> > Hello,
>
> > I have a requirement for a slightly unusual PCB. Does anybody
> (preferably in
> > the UK) know of a fab house who could make something with these
> > specifications?:
>
> > (1) 0.3 mm thick substrate.
> > (2) Double sided.
> > (3) Approx 10x0.4mm dia plated through holes.
> > (4) Small size ~6x6mm.
> > (5) Fairly complex profiles (irregular octagonal).
> > (6) Profile needs to be accurate to 0.05mm or so as it is used for
> > mechanical location.
> > (7) Initial requirement for 25 or so for evaluation going to
> 100s off for
> > production.
>
> > Thanks for your time.
>
> > Steve.
>
>
>
> You could try my local place which have done things on 0.25mm board
> for me before, at
> http://www.glrprocessing.com/
>
> They do good quality work in small batches
>
> --
> David Want
> VVLP Electronics Ltd
> 47 Percival Road  *  Rugby  *  Warwickshire  *  CV22 5JU
> 01788 541790
>
>



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to