ok, i see that now

ds


Tony Karavidas wrote:
> 
> True, but changing the net color would only change the ratsnets. He already
> has a routed board with a short somewhere. DXP would help him see it.
> 
> 
> 
> > -----Original Message-----
> > From: Dennis Saputelli [mailto:[EMAIL PROTECTED]
> > Sent: Saturday, February 28, 2004 4:48 PM
> > To: Protel EDA Forum
> > Subject: Re: [PEDA] How to highlight the Net in different
> > colors in 99SE
> >
> > but you can make the nets different colors you just can't
> > change the highlight color which i think is what he wanted
> > just double click the net in browse PCB
> >
> > Dennis Saputelli
> >
> > Tony Karavidas wrote:
> > >
> > > You can't because there is only one highlight color.
> > >
> > > If you had DXP you could filter by the two nets, such as
> > (Net = 'A5')
> > > OR (Net = 'D0') and using the masking feature, these two nets are
> > > shows very clearly.
> > >
> > > Tony
> > >
> > > > -----Original Message-----
> > > > From: Adeel Malik [mailto:[EMAIL PROTECTED]
> > > > Sent: Saturday, February 28, 2004 5:44 AM
> > > > To: Protel EDA Forum
> > > > Subject: [PEDA] How to highlight the Net in different
> > colors in 99SE
> > > >
> > > > Hi All,
> > > >         I have a populated board which has two nets
> > shorted to each
> > > > other during assembly. I want to view both of the nets with
> > > > different colors in Protel 99SE PCB document, so that I
> > can locate
> > > > the potential areas where the two nets are in close proximity.
> > > >
> > > > Can some one tell me how to view the two nets with
> > different colors
> > > > to solve the afore-mentioned problem in Protel 99SE ?>
> > > >
> > > > Thanks,
> > > > ADEEL MALIK
> > > >
> > > >
> > > >
> > > >
> > > >
> >

-- 
_______________________________________________________________________
Integrated Controls, Inc.           Tel: 415-647-0480  EXT 107 
2851 21st Street                    Fax: 415-647-3003
San Francisco, CA 94110             www.integratedcontrolsinc.com



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to