Sorry Mike

Assumption is the mother of all.... Or so they say

Yes I assumed it was in a project :(, never tried it any other way

John



> -----Original Message-----
> From: Mike Reagan [mailto:[EMAIL PROTECTED] 
> Sent: Wednesday, April 14, 2004 6:01 PM
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Need more software
> 
> John
> See, now Ya'll dont read everything I write.  No, you can not 
> disable Camtastic unless a project is open.  I only design 
> PCB so the Project Button is muted and can not be disabled.  
> Trust me .... I ve been thru this with tech support also Mike
> 
> 
> 
> 
> 
> -----Original Message-----
> From: John A. Ross [Design] [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, April 14, 2004 12:21 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Need more software
> 
> 
> > -----Original Message-----
> > From: Mike Reagan [mailto:[EMAIL PROTECTED]
> > Sent: Wednesday, April 14, 2004 4:56 PM
> > To: 'Protel EDA Forum'
> > Subject: Re: [PEDA] Need more software
> > 
> > snip <
> 
> > Camtastic is a step in the right direction. Again I don't like the 
> > integration. Specifically, I don't like the fact that every 
> time you 
> > generate gerbers it automatically pops up.  Protel this is 
> waist of my 
> > time.
> 
> Mike
> 
> You can disable this by telling it not to open output files 
> after generated.
> 
> Project Options, Output Options, Open output after compile, uncheck.
> 
> I know that makes no sense because of this compile word. 
> 
> Ian drops hints about the poor choice of the word 'compile' 
> quite regularly in his postings, but it is still there, 
> perhaps in SP1 ? :-) 
> 
> As regards, net antennas & Camtastic, I just tried a board 
> with a spare 2mm trace sticking out from a 1.2mm via and the 
> PCB Design Check comes up clean. I am looking to see if it is 
> me, or the tool before posting more.
> 
> 
> John
> 
> 
> 



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to