Press the keys: O L
This is options/layers and you can turn on and off 'til you heart's content. Someone on this list wrote a server I think to do the flip, but generally the answer is no. You can try using the 3D viewer and flip the 'view' that way. Tony -----Original Message----- From: Trent Bates [mailto:[EMAIL PROTECTED] Sent: Thursday, June 10, 2004 10:36 AM To: Protel EDA Forum Subject: [PEDA] Viewing a mirroed bottom layer and other layers I use Protel 99SE. Is it possible to view different layers and turn different layers on and off. I know that by pressing <SHIFT> +S, I will view only the current layer but its it possible to select which layers are being viewed. For example when looking at my top layer I would like to see the Top layer and the Top Layer overlay . Also is it possible to flip the board around and view the bottom layer as if it were the top. Once I fabricate and start troubleshooting the PCB I would like to be able to view what I have in real life. When I am looking at the top layer on my PCB I am looking at my top layer in Protel and when I filp my PCB around and look at the bottom layer I want to be able flip my view around in Protel so that I see the bottom of the board. I no longer want to see a mirrored version. This stuff is not critical but it would be a nice to have. This is especially true when I am working with very dense boards. Trentino * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
