Hi, I also have a Digi 003 with the moving fading controls that I would be willing to sell if anyone is interested as I will want something that is supported threw at least the next three versions or so of Pro Tools and if possible something that also will allow me to connect it to my windows system and record using programs that blind people use on the windows side of things. I was hearing a lot of good things about the Artist control surfaces and the new USB interfaces but don't want to lose any inputs or outputs. What is a good USB audio interface that has the same amount of inputs and outputs as the Digi 003? I don't mind getting one that just works on the mac but would like something that works on both systems so I can take it around and use it different places with different systems. Nick Gawronski On Tue, November 10, 2015 6:20 am, Slau Halatyn wrote: > The 003 is still supported. There will come a time when it's not > officially supported but will still work but will not be tested with > subsequent versions of Pro Tools. At this time, I certainly wouldn't buy > a new one but you can still pick up a used one for considerably less than > what it sold for new. Slau > > > On Nov 10, 2015, at 3:16 AM, Krister Ekstrom <[email protected]> > wrote: > > >> But is it really a good idea to buy a 003 now seeing that it probably >> will be obsolete come v13? According to how the releases have been >> during the years i have had Pro tools, v13 may not be far off. /Krister >> >> >>> 10 nov. 2015 kl. 01:33 skrev Slau Halatyn <[email protected]>: >>> >>> >>> The 003 does work with PT 12. >>> Slau >>> >>> >>> On Nov 9, 2015, at 1:55 PM, Poppa Bear <[email protected]> >>> wrote: >>> >>> >>>> Does the Digidesign 003 not work with PT12? It has 8 ins, 4 >>>> preamps, jog wheel, two headphone jacks with separate volume knobs >>>> and 8 motorized faders as well as fader flip mode. Like most all in >>>> one surfaces I think that the converters and the pres are a little >>>> week, but you can expand the converters via light pipe. >>>> >>>> -----Original Message----- >>>> From: [email protected] [mailto:[email protected]] >>>> On Behalf Of Jed Barton >>>> Sent: Monday, November 09, 2015 4:10 AM >>>> To: [email protected] >>>> Subject: Re: Control Surface Recommendations >>>> >>>> >>>> email me off list and tell me more >>>> >>>> On 11/9/2015 2:59 AM, [email protected] wrote: >>>> >>>>> Shell we do this of list? Here the Qcon seems to be a black sheep >>>>> >>>>> >>>>>> Op 9 nov. 2015 om 07:38 heeft Jed Barton <[email protected]> >>>>>> het volgende geschreven: >>>>>> >>>>>> alright, so tell me about this 1, sounds cool >>>>>> >>>>>>> On 11/9/2015 1:18 AM, [email protected] wrote: >>>>>>> Icon QCon Pro! >>>>>>> >>>>>>> >>>>>>>> Op 9 nov. 2015 om 05:40 heeft Jed Barton >>>>>>>> <[email protected]> het volgende geschreven: >>>>>>>> >>>>>>>> >>>>>>>> Hey guys, >>>>>>>> I'm looking in the same general price range for a control >>>>>>>> surface. Any ideas? >>>>>>>> >>>>>>>> >>>>>>>>> On 11/8/2015 3:32 PM, Darwin May wrote: >>>>>>>>> Hello, I know this is a old thread. But could not figure >>>>>>>>> out how to post a new thread. So I am asking what surface >>>>>>>>> controller would you recommend for a beginner? I am >>>>>>>>> getting ready to buy ProTools 12. I am currently using a >>>>>>>>> Mac book Pro with a I five processor and 8 GB of RAM and >>>>>>>>> one terabyte hard drive. I am looking for something that >>>>>>>>> will be easy to use, also, will be able to input drums >>>>>>>>> microphones for my drum set any recommendations would be >>>>>>>>> greatly appreciated. Thanks note: looking at a price range >>>>>>>>> from $700-$1500. >>>>>>>>> >>>>>>>>> Sent from my iPhone >>>>>>>>> >>>>>>>>> >>>>>>>>>> On Apr 1, 2015, at 8:05 PM, TheOreoMonster >>>>>>>>>> <[email protected]> wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> nothing that couldn’t easily be fixed with some dot >>>>>>>>>> markers and a little adhesive. The hot key matrix >>>>>>>>>> interns me more in program like reaper that gives you a >>>>>>>>>> lot of flexibility with assigning surfaces though. >>>>>>>>>>> On Apr 1, 2015, at 8:09 PM, Scott Gillen >>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> There are 8 rows of 18 keys and as far as I know >>>>>>>>>>> there are no tactile markings so I think it would be >>>>>>>>>>> real easy to get lost with a keyboard of that size. >>>>>>>>>>> >>>>>>>>>>> Scott >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Sent from my iPhone >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> On 2/04/2015, at 11:23 AM, TheOreoMonster >>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> You are confusing the Hot Key Metrix with the >>>>>>>>>>>> Editor Keys pro Tools keyboard. The Editors Key Pro >>>>>>>>>>>> Tools keyboard is a standard computer keyboard with >>>>>>>>>>>> the Pro Tools hotKeys printed on each key along >>>>>>>>>>>> with the the normal letters of the keyboard. Its >>>>>>>>>>>> basically a cheat sheet for a sighted person so >>>>>>>>>>>> they won’t have to remember all the keyboard >>>>>>>>>>>> shortcuts. >>>>>>>>>>>> >>>>>>>>>>>> The hot key matrix is a controller that only has >>>>>>>>>>>> buttons and each of pro tools functions are >>>>>>>>>>>> assigned to a button so they can be done in a >>>>>>>>>>>> single button press. i think the hot key matrix has >>>>>>>>>>>> something like 145 or something buttons on it. >>>>>>>>>>>>> On Apr 1, 2015, at 2:27 PM, Poppa Bear >>>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> I thought that these were more for sighted folks >>>>>>>>>>>>> so that they could just have a visual aid to be >>>>>>>>>>>>> able to use the native Pro Tools short cut keys >>>>>>>>>>>>> with certain keyboard labels? I could be wrong. >>>>>>>>>>>>> >>>>>>>>>>>>> -----Original Message----- >>>>>>>>>>>>> From: [email protected] >>>>>>>>>>>>> [mailto:[email protected]] On Behalf Of >>>>>>>>>>>>> Nickus de Vos >>>>>>>>>>>>> Sent: Wednesday, April 01, 2015 9:02 AM >>>>>>>>>>>>> To: [email protected] >>>>>>>>>>>>> Subject: Re: Control Surface Recommendations >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Not quite a control serfice but almost, any of >>>>>>>>>>>>> you using or used a Hotkey Matrix before? >>>>>>>>>>>>> >>>>>>>>>>>>> As I understand it's basically a keyboard and all >>>>>>>>>>>>> keys have dedicated functions in PT, so there's no >>>>>>>>>>>>> key with 2 or more functions by using modifier >>>>>>>>>>>>> keys etc. I'm just wondering if it will be useful >>>>>>>>>>>>> and whether it will be possible to memorise the >>>>>>>>>>>>> layout of all keys. >>>>>>>>>>>>> >>>>>>>>>>>>>> On 3/25/15, Mac Egbert <[email protected]> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> Hi Slau, >>>>>>>>>>>>>> for as far as I can see, other services use the >>>>>>>>>>>>>> same protocols as the once from Avid. I searched >>>>>>>>>>>>>> for this in the manual, and automation is taken >>>>>>>>>>>>>> care of, also for plugin parameters. I will >>>>>>>>>>>>>> test this Myself soonly. If it works as good as >>>>>>>>>>>>>> the avid controle >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed >>>>>>>>>>> to the Google Groups "Pro Tools Accessibility" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving >>>>>>>>>>> emails from it, send an email to >>>>>>>>>>> [email protected]. For more >>>>>>>>>>> options, visit https://groups.google.com/d/optout. >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>> the Google Groups "Pro Tools Accessibility" group. To >>>>>>>>>> unsubscribe from this group and stop receiving emails >>>>>>>>>> from it, send an email to >>>>>>>>>> [email protected]. For more options, >>>>>>>>>> visit https://groups.google.com/d/optout. >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the >>>>>>>> Google Groups "Pro Tools Accessibility" group. >>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>> from it, send an email to >>>>>>>> [email protected]. For more options, >>>>>>>> visit https://groups.google.com/d/optout. >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the >>>>>> Google Groups "Pro Tools Accessibility" group. >>>>>> To unsubscribe from this group and stop receiving emails from >>>>>> it, send an email to [email protected]. For >>>>>> more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, >>>> send an email to [email protected]. For more >>>> options, visit https://groups.google.com/d/optout. >>>> >>>> >>>> --- >>>> This email has been checked for viruses by Avast antivirus software. >>>> https://www.avast.com/antivirus >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, >>>> send an email to [email protected]. For more >>>> options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. For more options, >>> visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google >> Groups "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send >> an email to [email protected]. For more options, >> visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. For more options, visit > https://groups.google.com/d/optout. > >
-- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
