Ffibys writes: > > Ive been fiddling around with sound on my Q60. > > > > Problem 1) Im using a standard PC speaker, but the sounds are so faint > > as to > > be barely audible. The Q60 manual says to use a speaker with an > > impedance of > > 32 or higher. Standard speakers are 8 Ohm, and I have yet to find an > > electronics shop that has heard of a 32 Ohm one. Is there another way to > > do > > this, or does anyone have a spare 3 - 4" speaker suitable for Qx0es > > kicking > > around that I could buy? > > > > Problem 2) Although barely audible, some samples recognisably sound the > > same > > on the Q60 as on QPC2, but others either sound different or cannot be > > heard > > at all. Any ideas? Or is this just a symptom of problem (1)? > > > > Per > > > > Are you using the sound device by Simon Goodwin or Wolfgang's Extensions? > If you use the latter, you won't be able to play 10 or 40KHz samples which > will sound too fast or too slow respectively. > There is a trick to get it to work correctly on the Qx0, however I do not > exactly remember what I did. I am sure Rich has kept notes on the issue > (and how we solved it)
I only want to play 20KHz samples to avoid the need for duplicate files across QPC2 and Qx0. Im not sure Rich did solve the problem, as QWord - beautiful as it looks on the Q60! - only beeps there, while it plays sampled sounds on QPC2. Per _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm