We are still looking at this. CentOS 7 might help, if you can try it out that would be greate.
On Tue, Feb 21, 2017 at 2:06 PM, Milan Stubniak <[email protected]> wrote: > Hi, > > i would like to ask if you have another advice to fix boot problem with new > fc driver in 3.0.11. > Should I try centos 7? > > thank you for response. > > > 2017-02-17 9:12 GMT+01:00 Milan Stubniak <[email protected]>: >> >> Thank you, >> >> /quadstorvtl/bin/vtconfig -m -v Test1 -s 30 working like a charm. >> >> Yes, with new rpm during initialization i get same error. No changes. >> >> >> Regards >> >> 2017-02-16 9:21 GMT+01:00 QUADStor VTL Support <[email protected]>: >>> >>> Sorry, the command was incomplete. You need the opertation type option >>> -a (add) or -x (delete) or -m (modify) -l (list) >>> >>> Try >>> /quadstorvtl/bin/vtconfig -m -v Test1 -s 30 >>> service quadstorvtl restart >>> /quadstorvtl/bin/vtconfig -l -v Test1 >>> >>> Wth the new RPM applied you still see the same error during >>> initialization. Correct ? >>> >>> On Thu, Feb 16, 2017 at 4:49 AM, Milan Stubniak <[email protected]> >>> wrote: >>> > I tried it but without success. It was the same. >>> > >>> > Also i tried increase number of slots by command : >>> > quadstorvtl/bin/vtconfig >>> > -v vtl1-s 30 , but it gave me >>> > >>> > # /quadstorvtl/bin/vtconfig -v Test1 -s 30 >>> > VTL type not specified >>> > vtconfig usage: >>> > >>> > So i tried : >>> > >>> > # /quadstorvtl/bin/vtconfig -v Test1 -t 08 -s 30 -i 4 -n 256 -d 20 -c 4 >>> > Invalid option specified >>> > >>> > Could you help me ? >>> > >>> > >>> > 2017-02-15 19:04 GMT+01:00 QUADStor VTL Support >>> > <[email protected]>: >>> >> >>> >> Please install >>> >> >>> >> http://www.quadstor.com/vtlnext/quadstor-vtl-ext-3.0.11.6-rhel6.x86_64.rpm >>> >> The boot issue should be fixed with this rpm and the same will be >>> >> included in the next release. >>> >> >>> >> On Wed, Feb 15, 2017 at 10:57 PM, QUADStor VTL Support >>> >> <[email protected]> wrote: >>> >> > Seems like an issue with the FC driver early on in the boot process. >>> >> > We will look into this now. >>> >> > >>> >> > On Wed, Feb 15, 2017 at 7:47 PM, Milan Stubniak >>> >> > <[email protected]> >>> >> > wrote: >>> >> >> Hi, >>> >> >> >>> >> >> i repeated upgrade process. >>> >> >> The original screen log is unreadable so i made some changes and >>> >> >> readable >>> >> >> log is boot-final.log. >>> >> >> The problem is fc driver in initramfs. I migrate OS from fc >>> >> >> multipath >>> >> >> disk >>> >> >> to localdrive and still getting same error. >>> >> >> >>> >> >> My fc card : QLogic QMH2562 8Gb FC HBA >>> >> >> After using original OS driver from original initramfs server boot >>> >> >> - >>> >> >> but >>> >> >> quadstorvtl not work (as expected). >>> >> >> >>> >> >> What can I do maybe try migrate from Centos 6 to Centos 7? >>> >> >> >>> >> >> Regards. >>> >> >> >>> >> >> Milan >>> >> >> >>> >> >> >>> >> >> >>> >> >> >>> >> >> >>> >> >> 2017-02-14 16:11 GMT+01:00 Milan Stubniak <[email protected]>: >>> >> >>> >>> >> >>> HI, >>> >> >>> >>> >> >>> Boot disk is accessed over fc and multipath from v3700 storage. I >>> >> >>> don`t >>> >> >>> have any logs or console output. >>> >> >>> I can repeat the upgrade process after few days - we need to >>> >> >>> acommplish >>> >> >>> our backups a then i will send you console output. >>> >> >>> >>> >> >>> Possible workaround: migrate boot a root partition to localdisk. >>> >> >>> Before it >>> >> >>> i will send you console output. >>> >> >>> >>> >> >>> Regards. >>> >> >>> >>> >> >>> >>> >> >>> 2017-02-14 15:50 GMT+01:00 QUADStor VTL Support >>> >> >>> <[email protected]>: >>> >> >>>> >>> >> >>>> Can you send us more information on the problem when booting from >>> >> >>>> SAN. >>> >> >>>> Is the boot disk accessed over FC ? Do you have an console output >>> >> >>>> which we can look into. 3.0.11 obivously has fixes over 3.0.8, so >>> >> >>>> it >>> >> >>>> better to be running the latest. >>> >> >>>> >>> >> >>>> On Tue, Feb 14, 2017 at 6:26 PM, Milan Stubniak >>> >> >>>> <[email protected]> >>> >> >>>> wrote: >>> >> >>>> > Thank you for your quick response. Very helpful. >>> >> >>>> > >>> >> >>>> > On Tuesday, February 14, 2017 at 1:08:08 PM UTC+1, quadstor >>> >> >>>> > wrote: >>> >> >>>> >> >>> >> >>>> >> You can increase the number of slots by >>> >> >>>> >> >>> >> >>>> >> /quadstorvtl/bin/vtconfig -v <vtl name> -s <number of slots> >>> >> >>>> >> >>> >> >>>> >> For example >>> >> >>>> >> /quadstorvtl/bin/vtconfig -v VTL1 -s 100 >>> >> >>>> >> >>> >> >>>> >> Then a quadstorvtl service restart is required >>> >> >>>> >> service quadstorvtl restart >>> >> >>>> >> >>> >> >>>> >> >>> >> >>>> >> Its ok to downgrade to 3.0.8. >>> >> >>>> >> >>> >> >>>> >> 3.0.11 changed the FC driver, its better to fix the boot >>> >> >>>> >> problem, >>> >> >>>> >> else you wont be able to install any further upgrades without >>> >> >>>> >> hitting >>> >> >>>> >> the problem again. Do you have any further information on the >>> >> >>>> >> boot >>> >> >>>> >> problem which you can share. You can send that information to >>> >> >>>> >> [email protected] >>> >> >>>> >> >>> >> >>>> >> On Tue, Feb 14, 2017 at 5:30 PM, Milan Stubniak >>> >> >>>> >> <[email protected]> >>> >> >>>> >> wrote: >>> >> >>>> >> > Hello, >>> >> >>>> >> > >>> >> >>>> >> > i would like to ask, if it is possile to somehow increase >>> >> >>>> >> > number >>> >> >>>> >> > of >>> >> >>>> >> > slots in >>> >> >>>> >> > existing vtl? >>> >> >>>> >> > I need to add more vcartridges. (maybe by changes in >>> >> >>>> >> > databse?) >>> >> >>>> >> > >>> >> >>>> >> > >>> >> >>>> >> > p.s. I had another problem too. I was performing upgrade to >>> >> >>>> >> > quadstor >>> >> >>>> >> > 3.0.11 >>> >> >>>> >> > from 3.0.8 and my centos 6.8 (kernel 2.6.32-642.13.1) won`t >>> >> >>>> >> > boot. I >>> >> >>>> >> > have >>> >> >>>> >> > boot from san configuration a problem was drivers in >>> >> >>>> >> > initramdisk. So >>> >> >>>> >> > i >>> >> >>>> >> > replace initramdisk with backup and uninstall quadstor >>> >> >>>> >> > 3.0.11 >>> >> >>>> >> > and >>> >> >>>> >> > install >>> >> >>>> >> > 3.0.8. It`s working. it is ok to downgrade quadstor? >>> >> >>>> >> > >>> >> >>>> >> > Thank you for your help. >>> >> >>>> >> > >>> >> >>>> >> > >>> >> >>>> >> > -- >>> >> >>>> >> > You received this message because you are subscribed to the >>> >> >>>> >> > Google >>> >> >>>> >> > Groups >>> >> >>>> >> > "QUADStor VTL" group. >>> >> >>>> >> > To unsubscribe from this group and stop receiving emails >>> >> >>>> >> > from >>> >> >>>> >> > it, >>> >> >>>> >> > send >>> >> >>>> >> > an >>> >> >>>> >> > email to [email protected]. >>> >> >>>> >> > For more options, visit https://groups.google.com/d/optout. >>> >> >>>> > >>> >> >>>> > -- >>> >> >>>> > You received this message because you are subscribed to the >>> >> >>>> > Google >>> >> >>>> > Groups >>> >> >>>> > "QUADStor VTL" group. >>> >> >>>> > To unsubscribe from this group and stop receiving emails from >>> >> >>>> > it, >>> >> >>>> > send >>> >> >>>> > an >>> >> >>>> > email to [email protected]. >>> >> >>>> > For more options, visit https://groups.google.com/d/optout. >>> >> >>>> >>> >> >>>> -- >>> >> >>>> You received this message because you are subscribed to a topic >>> >> >>>> in >>> >> >>>> the >>> >> >>>> Google Groups "QUADStor VTL" group. >>> >> >>>> To unsubscribe from this topic, visit >>> >> >>>> >>> >> >>>> >>> >> >>>> https://groups.google.com/d/topic/quadstor-vtl/-elpaJxY0p0/unsubscribe. >>> >> >>>> To unsubscribe from this group and all its topics, send an email >>> >> >>>> to >>> >> >>>> [email protected]. >>> >> >>>> For more options, visit https://groups.google.com/d/optout. >>> >> >>> >>> >> >>> >>> >> >> >>> >> >> -- >>> >> >> You received this message because you are subscribed to the Google >>> >> >> Groups >>> >> >> "QUADStor VTL" group. >>> >> >> To unsubscribe from this group and stop receiving emails from it, >>> >> >> send >>> >> >> an >>> >> >> email to [email protected]. >>> >> >> For more options, visit https://groups.google.com/d/optout. >>> >> >>> >> -- >>> >> You received this message because you are subscribed to a topic in the >>> >> Google Groups "QUADStor VTL" group. >>> >> To unsubscribe from this topic, visit >>> >> >>> >> https://groups.google.com/d/topic/quadstor-vtl/-elpaJxY0p0/unsubscribe. >>> >> To unsubscribe from this group and all its topics, send an email to >>> >> [email protected]. >>> >> For more options, visit https://groups.google.com/d/optout. >>> > >>> > >>> > -- >>> > You received this message because you are subscribed to the Google >>> > Groups >>> > "QUADStor VTL" group. >>> > To unsubscribe from this group and stop receiving emails from it, send >>> > an >>> > email to [email protected]. >>> > For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "QUADStor VTL" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/quadstor-vtl/-elpaJxY0p0/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> > > -- > You received this message because you are subscribed to the Google Groups > "QUADStor VTL" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
