Thank you, /quadstorvtl/bin/vtconfig -m -v Test1 -s 30 working like a charm.
Yes, with new rpm during initialization i get same error. No changes. Regards 2017-02-16 9:21 GMT+01:00 QUADStor VTL Support <[email protected]>: > Sorry, the command was incomplete. You need the opertation type option > -a (add) or -x (delete) or -m (modify) -l (list) > > Try > /quadstorvtl/bin/vtconfig -m -v Test1 -s 30 > service quadstorvtl restart > /quadstorvtl/bin/vtconfig -l -v Test1 > > Wth the new RPM applied you still see the same error during > initialization. Correct ? > > On Thu, Feb 16, 2017 at 4:49 AM, Milan Stubniak <[email protected]> > wrote: > > I tried it but without success. It was the same. > > > > Also i tried increase number of slots by command : > quadstorvtl/bin/vtconfig > > -v vtl1-s 30 , but it gave me > > > > # /quadstorvtl/bin/vtconfig -v Test1 -s 30 > > VTL type not specified > > vtconfig usage: > > > > So i tried : > > > > # /quadstorvtl/bin/vtconfig -v Test1 -t 08 -s 30 -i 4 -n 256 -d 20 -c 4 > > Invalid option specified > > > > Could you help me ? > > > > > > 2017-02-15 19:04 GMT+01:00 QUADStor VTL Support <[email protected] > >: > >> > >> Please install > >> http://www.quadstor.com/vtlnext/quadstor-vtl-ext-3.0. > 11.6-rhel6.x86_64.rpm > >> The boot issue should be fixed with this rpm and the same will be > >> included in the next release. > >> > >> On Wed, Feb 15, 2017 at 10:57 PM, QUADStor VTL Support > >> <[email protected]> wrote: > >> > Seems like an issue with the FC driver early on in the boot process. > >> > We will look into this now. > >> > > >> > On Wed, Feb 15, 2017 at 7:47 PM, Milan Stubniak <[email protected]> > >> > wrote: > >> >> Hi, > >> >> > >> >> i repeated upgrade process. > >> >> The original screen log is unreadable so i made some changes and > >> >> readable > >> >> log is boot-final.log. > >> >> The problem is fc driver in initramfs. I migrate OS from fc multipath > >> >> disk > >> >> to localdrive and still getting same error. > >> >> > >> >> My fc card : QLogic QMH2562 8Gb FC HBA > >> >> After using original OS driver from original initramfs server boot - > >> >> but > >> >> quadstorvtl not work (as expected). > >> >> > >> >> What can I do maybe try migrate from Centos 6 to Centos 7? > >> >> > >> >> Regards. > >> >> > >> >> Milan > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> 2017-02-14 16:11 GMT+01:00 Milan Stubniak <[email protected]>: > >> >>> > >> >>> HI, > >> >>> > >> >>> Boot disk is accessed over fc and multipath from v3700 storage. I > >> >>> don`t > >> >>> have any logs or console output. > >> >>> I can repeat the upgrade process after few days - we need to > >> >>> acommplish > >> >>> our backups a then i will send you console output. > >> >>> > >> >>> Possible workaround: migrate boot a root partition to localdisk. > >> >>> Before it > >> >>> i will send you console output. > >> >>> > >> >>> Regards. > >> >>> > >> >>> > >> >>> 2017-02-14 15:50 GMT+01:00 QUADStor VTL Support > >> >>> <[email protected]>: > >> >>>> > >> >>>> Can you send us more information on the problem when booting from > >> >>>> SAN. > >> >>>> Is the boot disk accessed over FC ? Do you have an console output > >> >>>> which we can look into. 3.0.11 obivously has fixes over 3.0.8, so > it > >> >>>> better to be running the latest. > >> >>>> > >> >>>> On Tue, Feb 14, 2017 at 6:26 PM, Milan Stubniak < > [email protected]> > >> >>>> wrote: > >> >>>> > Thank you for your quick response. Very helpful. > >> >>>> > > >> >>>> > On Tuesday, February 14, 2017 at 1:08:08 PM UTC+1, quadstor > wrote: > >> >>>> >> > >> >>>> >> You can increase the number of slots by > >> >>>> >> > >> >>>> >> /quadstorvtl/bin/vtconfig -v <vtl name> -s <number of slots> > >> >>>> >> > >> >>>> >> For example > >> >>>> >> /quadstorvtl/bin/vtconfig -v VTL1 -s 100 > >> >>>> >> > >> >>>> >> Then a quadstorvtl service restart is required > >> >>>> >> service quadstorvtl restart > >> >>>> >> > >> >>>> >> > >> >>>> >> Its ok to downgrade to 3.0.8. > >> >>>> >> > >> >>>> >> 3.0.11 changed the FC driver, its better to fix the boot > problem, > >> >>>> >> else you wont be able to install any further upgrades without > >> >>>> >> hitting > >> >>>> >> the problem again. Do you have any further information on the > boot > >> >>>> >> problem which you can share. You can send that information to > >> >>>> >> [email protected] > >> >>>> >> > >> >>>> >> On Tue, Feb 14, 2017 at 5:30 PM, Milan Stubniak > >> >>>> >> <[email protected]> > >> >>>> >> wrote: > >> >>>> >> > Hello, > >> >>>> >> > > >> >>>> >> > i would like to ask, if it is possile to somehow increase > number > >> >>>> >> > of > >> >>>> >> > slots in > >> >>>> >> > existing vtl? > >> >>>> >> > I need to add more vcartridges. (maybe by changes in databse?) > >> >>>> >> > > >> >>>> >> > > >> >>>> >> > p.s. I had another problem too. I was performing upgrade to > >> >>>> >> > quadstor > >> >>>> >> > 3.0.11 > >> >>>> >> > from 3.0.8 and my centos 6.8 (kernel 2.6.32-642.13.1) won`t > >> >>>> >> > boot. I > >> >>>> >> > have > >> >>>> >> > boot from san configuration a problem was drivers in > >> >>>> >> > initramdisk. So > >> >>>> >> > i > >> >>>> >> > replace initramdisk with backup and uninstall quadstor 3.0.11 > >> >>>> >> > and > >> >>>> >> > install > >> >>>> >> > 3.0.8. It`s working. it is ok to downgrade quadstor? > >> >>>> >> > > >> >>>> >> > Thank you for your help. > >> >>>> >> > > >> >>>> >> > > >> >>>> >> > -- > >> >>>> >> > You received this message because you are subscribed to the > >> >>>> >> > Google > >> >>>> >> > Groups > >> >>>> >> > "QUADStor VTL" group. > >> >>>> >> > To unsubscribe from this group and stop receiving emails from > >> >>>> >> > it, > >> >>>> >> > send > >> >>>> >> > an > >> >>>> >> > email to [email protected]. > >> >>>> >> > For more options, visit https://groups.google.com/d/optout. > >> >>>> > > >> >>>> > -- > >> >>>> > You received this message because you are subscribed to the > Google > >> >>>> > Groups > >> >>>> > "QUADStor VTL" group. > >> >>>> > To unsubscribe from this group and stop receiving emails from it, > >> >>>> > send > >> >>>> > an > >> >>>> > email to [email protected]. > >> >>>> > For more options, visit https://groups.google.com/d/optout. > >> >>>> > >> >>>> -- > >> >>>> You received this message because you are subscribed to a topic in > >> >>>> the > >> >>>> Google Groups "QUADStor VTL" group. > >> >>>> To unsubscribe from this topic, visit > >> >>>> > >> >>>> https://groups.google.com/d/topic/quadstor-vtl/- > elpaJxY0p0/unsubscribe. > >> >>>> To unsubscribe from this group and all its topics, send an email to > >> >>>> [email protected]. > >> >>>> For more options, visit https://groups.google.com/d/optout. > >> >>> > >> >>> > >> >> > >> >> -- > >> >> You received this message because you are subscribed to the Google > >> >> Groups > >> >> "QUADStor VTL" group. > >> >> To unsubscribe from this group and stop receiving emails from it, > send > >> >> an > >> >> email to [email protected]. > >> >> For more options, visit https://groups.google.com/d/optout. > >> > >> -- > >> You received this message because you are subscribed to a topic in the > >> Google Groups "QUADStor VTL" group. > >> To unsubscribe from this topic, visit > >> https://groups.google.com/d/topic/quadstor-vtl/-elpaJxY0p0/unsubscribe. > >> To unsubscribe from this group and all its topics, send an email to > >> [email protected]. > >> For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > You received this message because you are subscribed to the Google Groups > > "QUADStor VTL" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to a topic in the > Google Groups "QUADStor VTL" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/quadstor-vtl/-elpaJxY0p0/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
