Hi, i repeated upgrade process. The original screen log is unreadable so i made some changes and readable log is boot-final.log. The problem is fc driver in initramfs. I migrate OS from fc multipath disk to localdrive and still getting same error.
My fc card : QLogic QMH2562 8Gb FC HBA After using original OS driver from original initramfs server boot - but quadstorvtl not work (as expected). What can I do maybe try migrate from Centos 6 to Centos 7? Regards. Milan 2017-02-14 16:11 GMT+01:00 Milan Stubniak <[email protected]>: > HI, > > Boot disk is accessed over fc and multipath from v3700 storage. I don`t > have any logs or console output. > I can repeat the upgrade process after few days - we need to acommplish > our backups a then i will send you console output. > > Possible workaround: migrate boot a root partition to localdisk. Before it > i will send you console output. > > Regards. > > > 2017-02-14 15:50 GMT+01:00 QUADStor VTL Support <[email protected]>: > >> Can you send us more information on the problem when booting from SAN. >> Is the boot disk accessed over FC ? Do you have an console output >> which we can look into. 3.0.11 obivously has fixes over 3.0.8, so it >> better to be running the latest. >> >> On Tue, Feb 14, 2017 at 6:26 PM, Milan Stubniak <[email protected]> >> wrote: >> > Thank you for your quick response. Very helpful. >> > >> > On Tuesday, February 14, 2017 at 1:08:08 PM UTC+1, quadstor wrote: >> >> >> >> You can increase the number of slots by >> >> >> >> /quadstorvtl/bin/vtconfig -v <vtl name> -s <number of slots> >> >> >> >> For example >> >> /quadstorvtl/bin/vtconfig -v VTL1 -s 100 >> >> >> >> Then a quadstorvtl service restart is required >> >> service quadstorvtl restart >> >> >> >> >> >> Its ok to downgrade to 3.0.8. >> >> >> >> 3.0.11 changed the FC driver, its better to fix the boot problem, >> >> else you wont be able to install any further upgrades without hitting >> >> the problem again. Do you have any further information on the boot >> >> problem which you can share. You can send that information to >> >> [email protected] >> >> >> >> On Tue, Feb 14, 2017 at 5:30 PM, Milan Stubniak <[email protected]> >> wrote: >> >> > Hello, >> >> > >> >> > i would like to ask, if it is possile to somehow increase number of >> >> > slots in >> >> > existing vtl? >> >> > I need to add more vcartridges. (maybe by changes in databse?) >> >> > >> >> > >> >> > p.s. I had another problem too. I was performing upgrade to quadstor >> >> > 3.0.11 >> >> > from 3.0.8 and my centos 6.8 (kernel 2.6.32-642.13.1) won`t boot. I >> >> > have >> >> > boot from san configuration a problem was drivers in initramdisk. So >> i >> >> > replace initramdisk with backup and uninstall quadstor 3.0.11 and >> >> > install >> >> > 3.0.8. It`s working. it is ok to downgrade quadstor? >> >> > >> >> > Thank you for your help. >> >> > >> >> > >> >> > -- >> >> > You received this message because you are subscribed to the Google >> >> > Groups >> >> > "QUADStor VTL" group. >> >> > To unsubscribe from this group and stop receiving emails from it, >> send >> >> > an >> >> > email to [email protected]. >> >> > For more options, visit https://groups.google.com/d/optout. >> > >> > -- >> > You received this message because you are subscribed to the Google >> Groups >> > "QUADStor VTL" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> an >> > email to [email protected]. >> > For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "QUADStor VTL" group. >> To unsubscribe from this topic, visit https://groups.google.com/d/to >> pic/quadstor-vtl/-elpaJxY0p0/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
Script started on Wed 15 Feb 2017 12:00:21 PM CET
</>hpiLO-> textcons
Starting Text Console.
Press 'Esc (' to return to the CLI Session.
[8;1H[1;1H[0;25;37;40m [2;1H[0;25;37;40m Press "F1" key to continue [3;1H[0;25;37;40m Press "F9" key for ROM-Based Setup Utility [8;1H[4;1H[0;25;37;40m Press "F10" key for System Maintenance Menu [5;1H[0;25;37;40m Press "F11" key for Default Boot Override Options [6;1H[0;25;37;40m Press "F12" key for Network Boot [7;1H[0;25;37;40m ] ? do_nmi+0x1c3/0x350 [8;1H[8;1H[7;1H[0;25;37;40m [8;1H[0;25;37;40m [3;1H[0;25;37;40m [4;1H[0;25;37;40m 0" key for System Maintenance Menu [1;1H[1;1H[1;1H[4;1H[0;25;37;40m [5;1H[0;25;37;40m [6;1H[0;25;37;40m [1;1H[1;1H[1;1H[1;1H[1;1H[1;1H[1;1H[1;1H[1;1H[2;1H[0m[1m[2J[
HMonitor is in graphics mode or an unsupported text mode. [25;1H[0;25;37;40m Probing EDD (edd=off to disable)... ok [4;1H[0;25;37;40m Console: colour VGA+ 80x25
console [tty0] enabled
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physi
CPU: Physi base: 0x000000f363e000 end: 0x000000f363ffff
mdmar: ATSR flags: 0x0
IOAPIC id 8 under DRHD base 0xf8ffe000
IOAPIC id 0 under DR
IOAPIC id 0 under DRg in xapic mode
APIC routing finalized to physical flat.
TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU
CPU0: Intel(R) Xeon(R) CPU orrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
CPUID marked event: 'bus cycles' unavailable ... version: 3 ... version: 3 ffff ... max period: 000000007fffffff ... fixed-purpose events: 3
... event mask: 000000070000000f
Booting Node 0, Processors #5 Ok.
Booting Node 1, Processors #6 Ok.
Booting Node 0, Processors #7 Ok.
0mpci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
mpci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
mpci 0000:01:00.4: PCI INT B disabled
Trying to unpack rootfs image as initramfs...
40mmsgmni has been set to 32768
ksign: Installing public key data
Loading keyring
Added pu base: 0x000000f363e000 end: 0x000000f363ffff
Added public key A83EBFF923BD961
User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
mio scheduler noop reg in xapic mode
io scheduler noop reatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI orrupted hw-PMU resources (MSR 38d is 330)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTMffff
input: Power Button as /devices/LNXSYSTM
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 664k freed
Freeing unused kernel memory: 1556k freed
dracut: dracut-004-409.el6_8.2
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: [email protected]
udev: starting version 147
device-mapper: multipath: version 1.6.0 loaded
usb 6-1: Manufacturer: HP
usb 6-1: configuration #1 chosen from 1 choice
hpsa 0000:0c:00.0: scsi 0:2:1:0: masked Direct-Access HP EH0146FARWD RAID-UNKNOWN SSDSmartPathCap- En- Exp=0
hpsa 0000:0c:00.0: scsi 0:0:0:0: added Direct-Access HP LOGICAL VOLUME RAID-1(blic key A83EBFF923BD961
RAID-1(:0: Direct-Access HP LOGICAL VOLUME 5.14 PQ: 0 ANSI: 5
musb 6-1: New USB device found, idVendor=03f0, idProduct=7029
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Viatory registered
usb 6-1: Product: Vi be2net version is 10.6.0.3r
be2net 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
be2net 0000:02:00.0: PCIe error reporting enabled
input: HP Virtual Keyboard aCore version: 0.5
input: HP Virtual Keyboard a2: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:01:00.4-1/input1
be2net 0000:02:00.0: adapter not in advanced mode
be2net 0000:02:00.0: FW config: function
be2net 0000:02:00.0: FW config: function_mode=0x1002403, function_caps=0xf
be2net 0000:02:00.0: Max: txqs 16, rxqs 5, rss 4, eqs 16, vfs 0
be2net 0000:02:00.0: Max: uc-macs 30, mc-macs 64, vlans 8
be2net 0000:02:00.0: enabled 4 MSI-x vector(s) for
be2net 0000:02:00.0: enabled 4 MSI-x vector(s) forEX10 port 1
be2net 0000:02:00.1: be2net version is 10.6.0.3r
be2net 0000:02:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34
be2net 0000:02:00.1: PCIe error reporting enabled
be2net 0000:02:00.1: created 4 TX queue(s)
be2net 0000:02:00.1: created 5 RX queue(s)
be2net 0000:02:00.1: FW version is 4.0.493.0
qla2xxx [0000:06:00.0]-001d: : Found an ISP2532 irq 30 iobase 0xffffc9000aeae000
be2net 0000:02:00.0: enabled 4 MSI-x vector(s) for NIC
be2net 0000:02:00.0: created 4 TX queue(s)
be2net 0000:02:00.0: created 5 RX queue(s)
be2net 000:0: Direct-Access HP LOGICAL VOLUME 5.14 PQ: 0 ANSI: 5
be2net 0000:02:00.1: Max: txqs 16, rxqs 5, rss 4, eqs 16, vfs 0
be2net 0000:02:00.1: Max: uc-macs 30, mc-macs 64, vlans 8
be2net 0000:02:00.1: enabled 4 MSI-x vector(s) for NIC
be2net 0000:02:00.1: be2net version is 10.6.0.3r
be2net 0000:02:00.1: created 4 TX queue(s)
be2net 0000:02:00.1: created 5 RX queue(s)
be2net 0000:02:00.1: FW version is 4.0.493.0
be2net 0000:02:00.1: HW Flow c2: input,hidraw1: USB HID v1.01 Mouse [HP Virtual[25;1H[25;1H[10;1H
be2net 0000:02:00.1: HW Flow c
qla2xxx 0000:06:00.0: firmware: requesting ql2500_fw.bin
scsi1 : qla2xxx
mqla2xxx [0000:06:00.0]-00fb:1: QLogic QM_mode=0x1002403, function_caps=0xf
qla2xxx [0000:06:00.0]-00fb:1: QLogic QM
qla2xxx [0000:06:00.0]-00fc:1: ISP2532: PCIe (5.0GT/s x8) @ 0000:06:00.0 hdma+ h[15;1H[0;25;37;40most#=1 fw=7.03.00 (90d5).
qla2xxx 0000:06:00.1: PCI INT B -> GSI 37 (level, EX10 port 1
qla2xxx 0000:06:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
qla2xxx [0000:06:00.1]-001d: : Found an ISP2532 irq 37 iobase 0xffffc9000aebe000 scsi2 : qla2xxx scsi2 : qla2xxx Dual Channel 8Gb Fib[20;1H[0;25;37;40mre Channel Mezzanine HBA.
qla2xxx [0000:06:00.1]-00fc:2: ISP2532: PCIe (5.0GT/s x8) @ 0000:06:00.1 hdma+ h[22;1H[0;25;37;40most#=2 fw=7.03.00 (90d5). mqla2xxx [0000:06:00.0]-500a:1: LOOP UP detected (8 Gbps). [24;1H[0;25;37;40mqla2xxx [0000:06:00.1]-500a:2: LOOP UP detected (8 Gbps).
be2net 0000:02:00.1: created 5 RX queue(s) [2;1H[0;25;37;40mbe2net 0000:02:00.1: FW version is 4.0.493.0
be2net 0000:02:00.1: HW Flow control - TX:1 RX:1
be2net 0000:02:00.1: Emulex OneConnect(be3): PF FLEX10 port 2
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k.
qla2xxx 0000:06:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
qla2xxx [0000:06:00. created 4 TX queue(s)
qla2xxx [0000:06:00. HBA.
qla2xxx [0000:06:00.0]-00fc:1: ISP2532: PCIe (5.0GT/s x8) @ 0000:06:00.0 hdma+ h[9;1H[0;25;37;40most#=1 fw=7.03.00 (90d5). qla2xxx 0000:06:00.1: PCI INT
qla2xxx 0000:06:00.1: PCI INT _create_file+0x19/0x20
[<ffffffff8137eaf8>] ? device_add+0x168/0x650
[<ffffffffa008b2a1>] ? fc_rport_match+0x51/0x90 [scsi_transport_fc]
[<ffffffff81385f74>] ? attribute_contai
[<ffffffff81385f74>] ? attribute_container_add_device+0x104/0x150
[<ffffffffa008f4a4>] ? fc_remote_port_add+0x5a4/0x7d0 [scsi_transport_fc]
[<ffffffffa00b09f2>] ? qla2x00_update_fcport+0x132/0x3c0 [qla2xxx]
[<ffffffffa00b0e13>] ? qla2x00_async_login_done+0low) -> IRQ 37
[<ffffffffa00b0e13>] ? qla2x00_async_login_done+0x143/0x170 [qla2xxx]
[<ffffffffa00a3d30>] ? qla2x00_do_work+0x1c0/0x270 [qla2xxx]
[<ffffffffa00e506b>] ? qla2x00_do_dpc_all_vps+0x9b/0x3a0 [qla2xxx]
[<ffffffffa00a44bb>] ? qla2x00_abort_all_cmds+0x3ab/0xb30 [Dual Channel 8Gb Fib[25;1H[25;1H[19;1H[0;25;37;40m
[<ffffffffa00a44bb>] ? qla2x00_abort_all_cmds+0x3ab/0xb30 [qla2xxx]
[<ffffffffa00a43a0>] ? qla2x00_abort_all_cmds+0x290/0xb30 [qla2xxx]
[<ffffffff810a640e>] ? kthread+0x9e/0xc0
[<ffffffff8100c28a>] ? child_rip+0xa/0x20
[<ffffffff810a6370>] ? kthread+0x0/0xc0
[<ffffffff8100c280>] ? child_rip+0x0/0x20
[<ffffffff811b74d7>] ? find_inode+0x27/0x90
[<ffffffff81217bf0>] ? sysfs_ilookup_test+0x0/0x20
[<ffffffff811b865d>] ? ifind+0x4d/0xd0
[<fffffff0:02:00.1: Emulex OneConnect(be3): PF FLEX10 port 2
[<ffffffff81217bf0>] ? sysfs_ilookup_test+0x0/0x20
[<ffffffff811b872a>] ? ilookup5+0x4a/0x60
[<ffffffff81217f18>] ? sysfs_addrm_start+0x58/0xd0
[<ffffffff812175d7>] ? sysfs_add_file_mode+0x57/0xb0
[<ffffffff81217641>] ? sysfs_add_file+0x11/0x20
[<ffffffff8121767b>] ? sysfs_create_file+0x2b/0x40
[<ffffffff8137e989>] ? device_create_file+0x19/0x20
</>hpiLO-> exit
status=0
status_tag=COMMAND COMPLETED
Wed Feb 15 12:03:19 2017
CLI session stopped
Script done on Wed 15 Feb 2017 12:03:40 PM CET
screenlog.0
Description: Binary data
