Sorry, the command was incomplete. You need the opertation type option
-a (add) or -x (delete) or -m (modify) -l (list)

Try
/quadstorvtl/bin/vtconfig -m -v Test1  -s 30
service quadstorvtl restart
/quadstorvtl/bin/vtconfig -l -v Test1

Wth the new RPM applied you still see the same error during
initialization. Correct ?

On Thu, Feb 16, 2017 at 4:49 AM, Milan Stubniak <stubni...@gmail.com> wrote:
> I tried it but without success. It was the same.
>
> Also i tried increase number of slots by command : quadstorvtl/bin/vtconfig
> -v vtl1-s 30 , but it gave me
>
> # /quadstorvtl/bin/vtconfig -v Test1  -s 30
> VTL type not specified
> vtconfig usage:
>
> So i tried :
>
> # /quadstorvtl/bin/vtconfig -v Test1 -t 08 -s 30 -i 4 -n 256 -d 20 -c 4
> Invalid option specified
>
> Could you help me ?
>
>
> 2017-02-15 19:04 GMT+01:00 QUADStor VTL Support <vtlsupp...@quadstor.com>:
>>
>> Please install
>> http://www.quadstor.com/vtlnext/quadstor-vtl-ext-3.0.11.6-rhel6.x86_64.rpm
>> The boot issue should be fixed with this rpm and the same will be
>> included in the next release.
>>
>> On Wed, Feb 15, 2017 at 10:57 PM, QUADStor VTL Support
>> <vtlsupp...@quadstor.com> wrote:
>> > Seems like an issue with the FC driver early on in the boot process.
>> > We will look into this now.
>> >
>> > On Wed, Feb 15, 2017 at 7:47 PM, Milan Stubniak <stubni...@gmail.com>
>> > wrote:
>> >> Hi,
>> >>
>> >> i repeated upgrade process.
>> >> The original screen log is  unreadable so i made some changes and
>> >> readable
>> >> log is boot-final.log.
>> >> The problem is fc driver in initramfs. I migrate OS from fc multipath
>> >> disk
>> >> to localdrive and still getting same error.
>> >>
>> >> My fc card : QLogic QMH2562 8Gb FC HBA
>> >> After using original OS driver from original initramfs server boot -
>> >> but
>> >> quadstorvtl not work (as expected).
>> >>
>> >>  What can I do maybe try migrate from Centos 6  to Centos 7?
>> >>
>> >> Regards.
>> >>
>> >> Milan
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> 2017-02-14 16:11 GMT+01:00 Milan Stubniak <stubni...@gmail.com>:
>> >>>
>> >>> HI,
>> >>>
>> >>> Boot disk is accessed over fc and multipath from v3700 storage. I
>> >>> don`t
>> >>> have any logs or console output.
>> >>> I can repeat the upgrade process after few days - we need to
>> >>> acommplish
>> >>> our backups a then i will send you console output.
>> >>>
>> >>> Possible workaround: migrate boot a root partition to localdisk.
>> >>> Before it
>> >>> i will send you console output.
>> >>>
>> >>> Regards.
>> >>>
>> >>>
>> >>> 2017-02-14 15:50 GMT+01:00 QUADStor VTL Support
>> >>> <vtlsupp...@quadstor.com>:
>> >>>>
>> >>>> Can you send us more information on the problem when booting from
>> >>>> SAN.
>> >>>> Is the boot disk accessed over FC ? Do you have an console output
>> >>>> which we can look into. 3.0.11 obivously has fixes over 3.0.8, so it
>> >>>> better to be running the latest.
>> >>>>
>> >>>> On Tue, Feb 14, 2017 at 6:26 PM, Milan Stubniak <stubni...@gmail.com>
>> >>>> wrote:
>> >>>> > Thank you for your quick response. Very helpful.
>> >>>> >
>> >>>> > On Tuesday, February 14, 2017 at 1:08:08 PM UTC+1, quadstor wrote:
>> >>>> >>
>> >>>> >> You can increase the number of slots by
>> >>>> >>
>> >>>> >> /quadstorvtl/bin/vtconfig -v <vtl name> -s <number of slots>
>> >>>> >>
>> >>>> >> For example
>> >>>> >> /quadstorvtl/bin/vtconfig -v VTL1 -s 100
>> >>>> >>
>> >>>> >> Then a quadstorvtl service restart is required
>> >>>> >> service quadstorvtl restart
>> >>>> >>
>> >>>> >>
>> >>>> >> Its ok to downgrade to 3.0.8.
>> >>>> >>
>> >>>> >>  3.0.11 changed the FC driver, its better to fix the boot problem,
>> >>>> >> else you wont be able to install any further upgrades without
>> >>>> >> hitting
>> >>>> >> the problem again. Do you have any further information on the boot
>> >>>> >> problem which you can share. You can send that information to
>> >>>> >> vtlsu...@quadstor.com
>> >>>> >>
>> >>>> >> On Tue, Feb 14, 2017 at 5:30 PM, Milan Stubniak
>> >>>> >> <stub...@gmail.com>
>> >>>> >> wrote:
>> >>>> >> > Hello,
>> >>>> >> >
>> >>>> >> > i would like to ask, if it is possile to somehow increase number
>> >>>> >> > of
>> >>>> >> > slots in
>> >>>> >> > existing vtl?
>> >>>> >> > I need to add more vcartridges. (maybe by changes in databse?)
>> >>>> >> >
>> >>>> >> >
>> >>>> >> > p.s. I had another problem too. I was performing upgrade to
>> >>>> >> > quadstor
>> >>>> >> > 3.0.11
>> >>>> >> > from 3.0.8 and my centos  6.8 (kernel 2.6.32-642.13.1) won`t
>> >>>> >> > boot. I
>> >>>> >> > have
>> >>>> >> > boot from san configuration a problem was drivers in
>> >>>> >> > initramdisk. So
>> >>>> >> > i
>> >>>> >> > replace initramdisk with backup and uninstall quadstor 3.0.11
>> >>>> >> > and
>> >>>> >> > install
>> >>>> >> > 3.0.8. It`s working. it is ok to downgrade quadstor?
>> >>>> >> >
>> >>>> >> > Thank you for your help.
>> >>>> >> >
>> >>>> >> >
>> >>>> >> > --
>> >>>> >> > You received this message because you are subscribed to the
>> >>>> >> > Google
>> >>>> >> > Groups
>> >>>> >> > "QUADStor VTL" group.
>> >>>> >> > To unsubscribe from this group and stop receiving emails from
>> >>>> >> > it,
>> >>>> >> > send
>> >>>> >> > an
>> >>>> >> > email to quadstor-vtl...@googlegroups.com.
>> >>>> >> > For more options, visit https://groups.google.com/d/optout.
>> >>>> >
>> >>>> > --
>> >>>> > You received this message because you are subscribed to the Google
>> >>>> > Groups
>> >>>> > "QUADStor VTL" group.
>> >>>> > To unsubscribe from this group and stop receiving emails from it,
>> >>>> > send
>> >>>> > an
>> >>>> > email to quadstor-vtl+unsubscr...@googlegroups.com.
>> >>>> > For more options, visit https://groups.google.com/d/optout.
>> >>>>
>> >>>> --
>> >>>> You received this message because you are subscribed to a topic in
>> >>>> the
>> >>>> Google Groups "QUADStor VTL" group.
>> >>>> To unsubscribe from this topic, visit
>> >>>>
>> >>>> https://groups.google.com/d/topic/quadstor-vtl/-elpaJxY0p0/unsubscribe.
>> >>>> To unsubscribe from this group and all its topics, send an email to
>> >>>> quadstor-vtl+unsubscr...@googlegroups.com.
>> >>>> For more options, visit https://groups.google.com/d/optout.
>> >>>
>> >>>
>> >>
>> >> --
>> >> You received this message because you are subscribed to the Google
>> >> Groups
>> >> "QUADStor VTL" group.
>> >> To unsubscribe from this group and stop receiving emails from it, send
>> >> an
>> >> email to quadstor-vtl+unsubscr...@googlegroups.com.
>> >> For more options, visit https://groups.google.com/d/optout.
>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "QUADStor VTL" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/quadstor-vtl/-elpaJxY0p0/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> quadstor-vtl+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "QUADStor VTL" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to quadstor-vtl+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to