I tried it but without success. It was the same. Also i tried increase number of slots by command : quadstorvtl/bin/vtconfig -v vtl1-s 30 , but it gave me
# /quadstorvtl/bin/vtconfig -v Test1 -s 30 VTL type not specified vtconfig usage: So i tried : # /quadstorvtl/bin/vtconfig -v Test1 -t 08 -s 30 -i 4 -n 256 -d 20 -c 4 Invalid option specified Could you help me ? 2017-02-15 19:04 GMT+01:00 QUADStor VTL Support <[email protected]>: > Please install http://www.quadstor.com/vtlnext/quadstor-vtl-ext-3.0. > 11.6-rhel6.x86_64.rpm > The boot issue should be fixed with this rpm and the same will be > included in the next release. > > On Wed, Feb 15, 2017 at 10:57 PM, QUADStor VTL Support > <[email protected]> wrote: > > Seems like an issue with the FC driver early on in the boot process. > > We will look into this now. > > > > On Wed, Feb 15, 2017 at 7:47 PM, Milan Stubniak <[email protected]> > wrote: > >> Hi, > >> > >> i repeated upgrade process. > >> The original screen log is unreadable so i made some changes and > readable > >> log is boot-final.log. > >> The problem is fc driver in initramfs. I migrate OS from fc multipath > disk > >> to localdrive and still getting same error. > >> > >> My fc card : QLogic QMH2562 8Gb FC HBA > >> After using original OS driver from original initramfs server boot - but > >> quadstorvtl not work (as expected). > >> > >> What can I do maybe try migrate from Centos 6 to Centos 7? > >> > >> Regards. > >> > >> Milan > >> > >> > >> > >> > >> > >> 2017-02-14 16:11 GMT+01:00 Milan Stubniak <[email protected]>: > >>> > >>> HI, > >>> > >>> Boot disk is accessed over fc and multipath from v3700 storage. I don`t > >>> have any logs or console output. > >>> I can repeat the upgrade process after few days - we need to acommplish > >>> our backups a then i will send you console output. > >>> > >>> Possible workaround: migrate boot a root partition to localdisk. > Before it > >>> i will send you console output. > >>> > >>> Regards. > >>> > >>> > >>> 2017-02-14 15:50 GMT+01:00 QUADStor VTL Support < > [email protected]>: > >>>> > >>>> Can you send us more information on the problem when booting from SAN. > >>>> Is the boot disk accessed over FC ? Do you have an console output > >>>> which we can look into. 3.0.11 obivously has fixes over 3.0.8, so it > >>>> better to be running the latest. > >>>> > >>>> On Tue, Feb 14, 2017 at 6:26 PM, Milan Stubniak <[email protected]> > >>>> wrote: > >>>> > Thank you for your quick response. Very helpful. > >>>> > > >>>> > On Tuesday, February 14, 2017 at 1:08:08 PM UTC+1, quadstor wrote: > >>>> >> > >>>> >> You can increase the number of slots by > >>>> >> > >>>> >> /quadstorvtl/bin/vtconfig -v <vtl name> -s <number of slots> > >>>> >> > >>>> >> For example > >>>> >> /quadstorvtl/bin/vtconfig -v VTL1 -s 100 > >>>> >> > >>>> >> Then a quadstorvtl service restart is required > >>>> >> service quadstorvtl restart > >>>> >> > >>>> >> > >>>> >> Its ok to downgrade to 3.0.8. > >>>> >> > >>>> >> 3.0.11 changed the FC driver, its better to fix the boot problem, > >>>> >> else you wont be able to install any further upgrades without > hitting > >>>> >> the problem again. Do you have any further information on the boot > >>>> >> problem which you can share. You can send that information to > >>>> >> [email protected] > >>>> >> > >>>> >> On Tue, Feb 14, 2017 at 5:30 PM, Milan Stubniak <[email protected] > > > >>>> >> wrote: > >>>> >> > Hello, > >>>> >> > > >>>> >> > i would like to ask, if it is possile to somehow increase number > of > >>>> >> > slots in > >>>> >> > existing vtl? > >>>> >> > I need to add more vcartridges. (maybe by changes in databse?) > >>>> >> > > >>>> >> > > >>>> >> > p.s. I had another problem too. I was performing upgrade to > quadstor > >>>> >> > 3.0.11 > >>>> >> > from 3.0.8 and my centos 6.8 (kernel 2.6.32-642.13.1) won`t > boot. I > >>>> >> > have > >>>> >> > boot from san configuration a problem was drivers in > initramdisk. So > >>>> >> > i > >>>> >> > replace initramdisk with backup and uninstall quadstor 3.0.11 and > >>>> >> > install > >>>> >> > 3.0.8. It`s working. it is ok to downgrade quadstor? > >>>> >> > > >>>> >> > Thank you for your help. > >>>> >> > > >>>> >> > > >>>> >> > -- > >>>> >> > You received this message because you are subscribed to the > Google > >>>> >> > Groups > >>>> >> > "QUADStor VTL" group. > >>>> >> > To unsubscribe from this group and stop receiving emails from it, > >>>> >> > send > >>>> >> > an > >>>> >> > email to [email protected]. > >>>> >> > For more options, visit https://groups.google.com/d/optout. > >>>> > > >>>> > -- > >>>> > You received this message because you are subscribed to the Google > >>>> > Groups > >>>> > "QUADStor VTL" group. > >>>> > To unsubscribe from this group and stop receiving emails from it, > send > >>>> > an > >>>> > email to [email protected]. > >>>> > For more options, visit https://groups.google.com/d/optout. > >>>> > >>>> -- > >>>> You received this message because you are subscribed to a topic in the > >>>> Google Groups "QUADStor VTL" group. > >>>> To unsubscribe from this topic, visit > >>>> https://groups.google.com/d/topic/quadstor-vtl/- > elpaJxY0p0/unsubscribe. > >>>> To unsubscribe from this group and all its topics, send an email to > >>>> [email protected]. > >>>> For more options, visit https://groups.google.com/d/optout. > >>> > >>> > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups > >> "QUADStor VTL" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an > >> email to [email protected]. > >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to a topic in the > Google Groups "QUADStor VTL" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/quadstor-vtl/-elpaJxY0p0/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
