I have been looking at the windscreen that was fitted to my "virtually ready for IVA" Xtreme. After finding that it was not bonded into the frame at all, I have found that with the lower rubber removed there is a gap of approx. 5mm between the scuttle and thr bottom of the windscreen in the middle.
Does anyone have any ideas how I can reduce this gap as even with a new rubber section installed, I am sure that there will still be a gap once the windscreen is bonded into place within the frame? Regards, Ian Mac -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
