Nigel, It is the original with the rubber only. The screen is touching at either side of the scuttle with the 5mm gap in the middle: i.e. the profile of the windscreen is incorrect and it needed to be less at the edges of the glass.
Ian Mac On Jun 20, 8:35 pm, nigelp <[email protected]> wrote: > Ian. Which design? Is the fitment a rubber only or the later > aluminum U section. If the latter, I wouldn't have thought it a > problem, on the former will write some more once know the > configuration. With this 5 mm is it touching at the edges ie 5mm > variation between screen and scuttle? > Nigel -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
