I've been back at work on it this week. Yesterday I established that the Mondeo V6 brakes - 260mm - fit without issue except that the mounting holes on the XR2 uprights need drilling out to 12mm. The 13" TVR wheel *almost* fit - they go on but won't turn without grinding...
The 15" focus wheels are about ten millimetres further from the mounting surface to the back of the rim, and so will need spacers to clear the rear swing arms - I've ordered 10mm spacers for the rear - and the track rod ends; 6mm there. Rally Design are supplying; hopefully today or tomorrow. The focus wheels need smaller tyres too; I'll probably go for 185/55 though 195/50 will give the same rolling radius - it's about 5% smaller than the Fiat speedo expects but I can live with that. The drive shafts were cut and TIG welded yesterday; we left them cooling overnight. More later. Neil -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
