id move the brackets, but as mentioned, the bar will be more likley to concentrate twist on the worn sections keep your eyes on ebay
On Jan 23, 2:17 pm, "Jim Hearne" <[email protected]> wrote: > This is not as easy, the roll bar is heat treated tempered steel, like a > spring. > If you weld it it will soften the metal and probably it will just twist and > stay twisted. > Or it will keep twisting and snap. > > You could try cleaning it and building it back up with metal loaded epoxy > resin but i don’t know how long it would last. > > Or you could move the brackets on the floor to a slightly different place so > they are on an unworn section. > > Jim > > From: hansdefauwes > Sent: Wednesday, January 23, 2013 2:12 PM > To: [email protected] > Subject: [Quantum Owners] Worn rear anti roll bar ? > > My Rear anti roll bar is worn at the places where the bushes are - > The diameter should be 14mm for the XR2 but now it is less and oval. > > How to fix this - weld and than file it round to 14mm?? > > Hans > > When done I'll zink plate all suspension/metal parts > I hate rust. > > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group > athttp://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or in > the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or alleged > to be caused directly or indirectly by the instructions contained within this > or related message(s). -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
