Hi, Wouldn’t they need a complete one, in order to take a mould off it? Is this something we could make ( a GRP mould?) then the club could own the tool, and just get them made?
Steve From: Pete M Sent: Sunday, April 07, 2013 6:14 PM To: [email protected] Cc: [email protected] Subject: Re: [Quantum Owners] H4 sill rubber strips On Saturday, 6 April 2013 17:27:31 UTC+1, [email protected] wrote: I know the owner of a business that makes boat rubbing strip mouldings among many other types of elastomer mouldings. If someone can send me a cross section drawing or even a smple cut from one that needs to be replaced I cam make some enquiries. In amongst the boxes of "stuff left over from the build or donor that I really ought to get rid of" I've got an offcut - images attached I had real problems with the strips that came with my kit - they had been supplied in three parts rather than two and the join had been left too proud for them to fit properly, which resulted in one of them starting to detach itself from the car somewhere around Cheltenham on the M5 during the 21st anniversary run.... I rubbed the join down before fitting the pair I bought when we got to Loddiswell, and sealed the ends with Sikaflex and they've been fine since Pete -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out. -------------------------------------------------------------------------------- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.3272 / Virus Database: 3162/6230 - Release Date: 04/07/13 -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
