Find the relay that operates the flaps (unplug one and see if the flaps stop working) and follow the wire from the coil back into the loom. At some point you should find 2 diodes, one end of each will be joined to the wire you followed, the other 2 ends should go to the main beam and the dipped beam circuits. Probably one of the diodes has corroded.
How is the electric Quantum project going ?, do you have a web site with details ?, any pictures ? Many thanks, Jim From: [email protected] Sent: Wednesday, April 17, 2013 12:12 PM To: [email protected] Subject: [Quantum Owners] 2+2 headlight lids wiring help needed please I have acquired a 1988 donor(approx) 2+2 which I have converted to run on LiPO4 battery power, but my latest stumbling block is getting the headlight lids to work consistently. They drop down when the light is on main beam, but do not move when the dipped lights are on. I have tested and there is power to the nearside battery block terminal when both main and dipped lights are on, but the stepper motor only runs with the full beam. There seem to be 2 relays, one in the 'manual suggested position' on the steel frame by the nearside suspension unit, the other attached to the nearside headlight housing. Thanks in advance for your help and ideas. Andrew -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
