Cheers Jim

Update to this one, the runners are too short! The way the seats are 
mounted is on a pair of L brackets, photo attached. These brackets act in 
place of the legs that would normally be on the runners. They're drilled 
right next to the 'hump' that the seat floor would just scrape

What I'm thinking of doing is cutting the bottom ones down by one hole so I 
can get the smaller length I need to mount the runners, that would give me 
2 holes on the bottom and 3 at the top. Is that a really bad idea or will I 
be OK? 

The ones that come off are mounted into the seat so cant be re-used (Rover 
seats, per this thread from ages 
ago https://groups.google.com/d/msg/quantumowners/6uku9bihzRs/SURuec5n9qYJ 



Andy

On Wednesday, 26 February 2014 08:53:36 UTC, Jim Hearne wrote:
>
>   Once you remove the brackets the Mk2 and Mk3 runners are pretty much 
> the same.
>  
> Don’t forget to use big (at least 2” dia) and thick (2mm) washers under 
> the floor on the bolts.
> An ordinary sized washer could pull through the floor in an accident.
>  
> Jim
>  
>   
>  *From:* Jamest142 <javascript:> 
> *Sent:* Saturday, February 22, 2014 11:19 AM
> *To:* quantu...@googlegroups..com <javascript:> 
> *Subject:* [Quantum Owners] Re: Mk2 seat runners / 2+2
>  
>  
> Hiya
>
> Dug out my build manual - not much info, but it states as follows :-
>
> 6.15.7  Front Seats.  Remove the rear mounting lugs from the bottom of the 
> seat runners by drilling out the rivets.  Bolt the seat to the floor.  The 
> carpet should be cut around the runners.  The correct location for the 
> fixing bolts has been scribed on the underside of the car floor.  It is 
> essential that the seat runners are parallel otherwise they will not slide 
> freely.
>
> The manual make no reference to Mk3.5, so I guess it is the standard Mk2 
> runners that are used.
>
> Hope this helps.
>
> Best regards
>
> James T
>
> Q2-002 
>
>  
>
>  
> -- 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Quantum Owners Group" group.
> To post to this group, send email to quantu...@googlegroups.com<javascript:>
> To unsubscribe from this group, send email to 
> quantumowner...@googlegroups.com <javascript:>
> For more options, visit this group at 
> http://groups.google.com/group/quantumowners?hl=en
>  
> IMPORTANT NOTE: All information presented herewith is provided on an "As 
> Is" basis, without warranty or the implication thereof. Neither the Quantum 
> Owners Club nor the individuals associated with the Quantum Owners Club or 
> in the preparation of the above information shall have any liability to any 
> person or entity with respect to liability, loss, or damage caused or 
> alleged to be caused directly or indirectly by the instructions contained 
> within this or related message(s).
> --- 
> You received this message because you are subscribed to the Google Groups 
> "Quantum Owners Group" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to quantumowner...@googlegroups.com <javascript:>.
> For more options, visit https://groups.google.com/groups/opt_out.
>

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

<<attachment: IMG_20140227_143537_1.jpg>>

Reply via email to