Dear All I hope someone can help. My recently purchased 2+2 has terrible brakes. I have replaced or refurbished the brake calipers and the pads are good. I purchased a replacement Servo but found it was very different to the original one fitted. I have tried to fit the new servo but find it is different in every sense.
Can anyone direct me to, or supply me with, a working servo for a 1986 1600 CVH engined Fiesta or the part number for. Failing a replacement - does anyone know what else it can be - the pressure required to get the brakes to work is as if there is no assistance from the servo. Any advice will be greatly appreciated. Cheers John -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/a61d63dc-e742-4a2b-b275-8cb381214f21n%40googlegroups.com.
