I've just had my 2+2 flywheel skimmed and the crank, flywheel and clutch cover plate balanced. Since then the clutch judders when pulling away. I kept the original part used clutch cover and friction plate because I couldn’t find a replacement.
Any ideas if this will settle down with more use or I do I need to replace the clutch. If I need to replace the clutch do any of you know where I can get a replacement for the following? The friction plate is marked Motorcraft 90 AB 7550 CA LOW LIFT LUK Thanks in advance Chris Fairlie Q2-001 -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/007301d92d9f%24ead61950%24c0824bf0%24%40btinternet.com.
