Hi
I've just replaced the bearings in the rear nearside hub on an H4
(Fiesta Mk3) and found that the inner bearing housing has been worn so
that I was able to turn the whole bearing insert by hand before pushing
it out. The section where it is set is larger diameter than the rest of
the tube through which the shell has to be pushed into place. The new
bearing is better than the old, but there is still a problem.
I cannot find anywhere that supplies replacement Fiesta 3 hubs. There
are items listed but these do not include the brake drums - mine are
integrated.
Does anyone know where a suitable spare may be found, or what else can
be done?
Thanks
--
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
---
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/quantumowners/e67704b8994498837afc90edb98a5ab8%40cityaudioservices.com.
