On Thu, Jun 25, 2020 at 08:54:51PM +0000, Matt Drez wrote:
> This is where I am at now (below). What would be the best course of
> action. What would you if this was your mess to clean up? :)

>   WARNING: Device
>   /dev/mapper/luks-55a20051-8c1a-435e-a1c8-862493f2d576 has size of
>   1948924598 sectors which is smaller than corresponding PV size of
>   1949320573 sectors. Was device resized?

this is a bit worrying and i am not sure how you ended up with that.

to clean this up, i would try ...
pvresize --setphysicalvolumesize 900g 
pvresize /dev/mapper/luks-55a20051-8c1a-435e-a1c8-862493f2d576

then check that the warning is gone (pvs or vgs).

AFTER resolving the PV size problem, i would grow the thin pool.

>   VG         #PV #LV #SN Attr   VSize   VFree  
>   qubes_dom0   1 141   0 wz--n- 929.51g 556.70g

> [@dom0 ~]$ sudo lvs qubes_dom0/pool00
>   LV     VG         Attr       LSize   Pool Origin Data%  Meta%  Move Log 
> Cpy%Sync Convert
>   pool00 qubes_dom0 twi-aotz-- 347.98g             86.33  14.67 

this suggests you resized the poolmetadata already?

if you did NOT:
        lvresize --poolmetadatasize +1G qubes_dom0/pool00

then resize the pool itself:
        lvresize -L +550G qubes_dom0/pool00

then check it worked by running "lvs qubes_dom0/pool00" again,
the new LSize should be 900g, and the Meta% should still be a lot
smaller than the Data%.

> [@dom0 ~]$ sudo df -h /
> Filesystem                   Size  Used Avail Use% Mounted on
> /dev/mapper/qubes_dom0-root  1.1T  9.7G  1.1T   1% /

this is unfortunate, but not critical.
if you really want to shrink the FS again, look up how to
shrink a ext4 FS. 
basicly you will have to boot from some rescue disk or live image,
open the luks container + lvm, fsck and resize2fs the fs, then shrink
the LV, then grow the fs again to fit.
if it were my system, i wouldnt bother with that.

You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 

Reply via email to