vining wrote: 
> Yeah sounds like your router is setup to hand out that specific IP to
> your Squeezebox but that doesn't explain why when running the UE
> software it worked properly.  Software/ firmware won't change the
> devices MAC address and that's what the router uses to determine
> pre-assigned addresses.
> 
> You only have a wired LAN so your not using the wireless nic and its
> MAC, hmmm, i can't think of anything to try except going into the SB and
> setting it up on a static address if possible.

1. login to router and temporarily turn off DHCP.
2. Do a factory reset of RADIO.
3. When radio tries to get IP address it will fail and the menu on radio
will offer to add manual IP address (may need to scroll down on radio
menu to see this option)
4. Give it this info (This assumes your Router is 192.168.1.1  (if
192.168.0.1, change accordingly). Also assumes that your DHCP is set to
hand out IP addresses starting at .100

IP Address:  192.168.1.20  (may need to be 192.168.001.020)
Subnet:  255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1

5. Then Radio should connect with that IP address.
6. Go back to Router, login and turn DHCP back to "on"


------------------------------------------------------------------------
garym's Profile: http://forums.slimdevices.com/member.php?userid=17325
View this thread: http://forums.slimdevices.com/showthread.php?t=97816

_______________________________________________
Radio mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/radio

Reply via email to