I definitely appreciate the multiple responses.

The ISP's upstream router which hands out the DHCP leases isn't mine to
control. My ISP just gives me an Ethernet jack to which I connect my
desktop switch, and then I connect my Squeezebox and my LMS computer to
the desktop switch. This configuration has worked for years, and it's
been exactly this way since I bought my Squeezebox a year ago.

But the problem with the DHCP is definitely with the Squeezebox.

For one thing, when I upgraded the Squeezebox to the UE firmware, it had
no problem at all in getting an up-to-date DHCP address from the correct
192.168.x.x range. (And like vining wrote, I double-checked in Settings
> Advanced > Diagnostics > General Info that the MAC address was the
same using both the old firmware as well as the new firmware. It was.)

But as soon as I downgraded the Squeezebox to the old firmware, it went
back to using the incorrect IP address from a very old DHCP lease.

After reading the responses here from toby10, mnyb, and garym, I decided
to see if in fact the upstream router had somehow started giving out a
fixed DHCP lease to the Squeezebox.

So I powered off the Squeezebox and disconnected it from the network.

Then, I shut down my LMS Windows machine, disconnected its Ethernet,
powered it on, set its MAC address to be the same as my Squeezebox, and
power-cycled it after reconnecting its Ethernet cable.

The computer came up fine with the MAC address of the Squeezebox, and it
received a DHCP lease in the correct (192.168.x.x) range.

So my ISP's upstream router is not handing out a fixed DHCP lease to
this MAC address.

It's some set of bits that are stuck somewhere in the Squeezebox's old
firmware's configuration that prevent it from obtaining a current DHCP
lease.

I know in Windows I can always do a "ipconfig /release" and "ipconfig
/renew" to get the computer to give up an old lease and force it to get
a new one.

Is there something like this that I can do on this Squeezebox to get the
same result? I can SSH into the Squeezebox and get to the shell. But I
don't know what to do from there.


------------------------------------------------------------------------
squeeze1234's Profile: http://forums.slimdevices.com/member.php?userid=54261
View this thread: http://forums.slimdevices.com/showthread.php?t=97816

_______________________________________________
Radio mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/radio

Reply via email to