Mnyb wrote: 
> An experiment, disconect the incoming cable from Comcast but keep it
> conected to the switch, redo the ethernet setup on radio, dhcp will now
> fail and the script for static ip will now be used, set a static-ip in
> the 192.168.x.y range.
> [...]
> Now what would it do if you redo the Ethernet setup again and returning
> to use dhcp ?

I did this experiment like you suggested (and like garym had suggested
earlier in this thread.)

1. I turned off my Squeezebox.
2. I disconnected the incoming Comcast ethernet cable from my desktop
switch
3. I forced a factory reset of the Squeezebox
4. The radio asked me to manually assign an IP address since it could no
longer find a DHCP server
5. I assigned the radio a free IP address in the 192.168.x.x range, and
set the network mask, gateway address, and DNS server to be the same as
that of my Windows LMS computer
6. I then reconnected the incoming Comcast ethernet cable to my desktop
switch
7. The radio completed the factory setup sequence

Now the radio was running using a manually assigned IP address, and it
could connect to my LMS server. It worked just like normal.

I then turned off my Squeezebox and forced a factory reset. This time,
the radio found my ISP's DHCP server and completed the factory setup
sequence. But to my dismay, the radio set itself up to use the old
cached 10.x.x.x IP address, and not a 192.168.x.x address that the
Comcast DHCP server currently assigns.

So it appears that switching to a manually assigned IP address, and then
to a DHCP assigned address, doesn't actually force the radio to get rid
of its old lease and obtain a new one.

As a sanity check, I once again upgraded this radio to the UE firmware.
Just like before, when using the UE firmware, it correctly accepted the
proper 192.168.x.x DHCP address from my ISP. I downgraded back to 7.7.2
r9663 and the radio went back to using the incorrect 10.x.x.x DHCP
address.

There has got be a way for me to tell this radio to discard its old
lease and obtain a new one under the 7.7.2 r9663 firmware, like it
always used to do.


------------------------------------------------------------------------
squeeze1234's Profile: http://forums.slimdevices.com/member.php?userid=54261
View this thread: http://forums.slimdevices.com/showthread.php?t=97816

_______________________________________________
Radio mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/radio

Reply via email to