squeeze1234 wrote: 
> Yes. I did this in my original testing when the problem first appeared.
> No change.
> I also did it after I downgraded from the UE firmware and saw the
> problem reappear. Again no change.
> 
> 
> 
> The thing is, I _can_ SSH to this Squeezebox from my Windows LMS
> computer. I just don't know the equivalent commands to Windows "ipconfig
> /release" and "ipconfig /renew" for the version of Linux that the
> Squeezebox runs.
> 
> 
> 
> I thought about this, and I might have to do things this way if I can't
> make it work with my current setup. I just hoped not to have to spend
> money on any additional equipment.

An experiment , disconect the incoming cable from Comcast but keep it
conected to the switch, redo the ethernet setup on radio , dhcp will now
fail and the script for static ip will now be used , set a static-ip in
the 192.168.x.y range .

You can find the settings by ipconfig on your pc ,dns ,gateway etc ,the
only thing that should differ is "x" in the ip and don't use an adress
that's in use by something else. Reconect the Internet cable .

You can keep it this way for a while , but it is not a permanent
solution as you could eventually get an ip conflict if the dhcp hands
out that ip to something else .

Now what would it do if you redo the Ethernet setup again and returning
to use dhcp ?


------------------------------------------------------------------------
Mnyb's Profile: http://forums.slimdevices.com/member.php?userid=4143
View this thread: http://forums.slimdevices.com/showthread.php?t=97816

_______________________________________________
Radio mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/radio

Reply via email to