squeeze1234 wrote: > I definitely appreciate the multiple responses. > > The ISP's upstream router which hands out the DHCP leases isn't mine to > control. My ISP just gives me an Ethernet jack to which I connect my > desktop switch, and then I connect my Squeezebox and my LMS computer to > the desktop switch. This configuration has worked for years, and it's > been exactly this way since I bought my Squeezebox a year ago. > > But the problem with the DHCP is definitely with the Squeezebox. > > For one thing, when I upgraded the Squeezebox to the UE firmware, it had > no problem at all in getting an up-to-date DHCP address from the correct > 192.168.x.x range. (And like vining wrote, I double-checked in Settings > > Advanced > Diagnostics > General Info that the MAC address was the > same using both the old firmware as well as the new firmware. It was.) > > But as soon as I downgraded the Squeezebox to the old firmware, it went > back to using the incorrect IP address from a very old DHCP lease. > > After reading the responses here from toby10, mnyb, and garym, I decided > to see if in fact the upstream router had somehow started giving out a > fixed DHCP lease to the Squeezebox. > > So I powered off the Squeezebox and disconnected it from the network. > > Then, I shut down my LMS Windows machine, disconnected its Ethernet, > powered it on, set its MAC address to be the same as my Squeezebox, and > power-cycled it after reconnecting its Ethernet cable. > > The computer came up fine with the MAC address of the Squeezebox, and it > received a DHCP lease in the correct (192.168.x.x) range. > > So my ISP's upstream router is not handing out a fixed DHCP lease to > this MAC address. > > It's some set of bits that are stuck somewhere in the Squeezebox's old > firmware's configuration that prevent it from obtaining a current DHCP > lease. > > I know in Windows I can always do a "ipconfig /release" and "ipconfig > /renew" to get the computer to give up an old lease and force it to get > a new one. > > Is there something like this that I can do on this Squeezebox to get the > same result? I can SSH into the Squeezebox and get to the shell. But I > don't know what to do from there.
Instead of a switch why not use a router so that you can have control over your local network , just let comcast dhcp the router ? then you could gain controll and for example set DHCP ranges and use statip ip as sugested by garym (i have static ip adresses on everything not portable and wont dhcp get near it ) . In fact a good test would be to connect the radio to a router at home . The Radio could very likly have bugs in this regard on the other hand I think the "home router network " is pretty much the expected configuration and propbaly the only one really tested by logitech (back when some rudimentary in-house testing was actually performed ,now it is you and me and the rest of this forum that do the testing :) ) It is a conundrum you could possible use SSH and flush some ip config files on it with Linux commands ,nut to do so you need it to conect to your network . Did you ever performed a full factory reset after reverting back to squeezebox firware ? ------------------------------------------------------------------------ Mnyb's Profile: http://forums.slimdevices.com/member.php?userid=4143 View this thread: http://forums.slimdevices.com/showthread.php?t=97816 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
