I am running the same application on two different laptops, both Windows 10 64 Bit, R:Base XE, one with Bitdefender (old machine) and the other (new) with Windows Defender. I find that with the same RX% files on both machines, the starting screen (an external form) will be displayed within about 5 seconds on the old laptop, while on the new one it takes in excess of 20 seconds. I have the same configuration settings (as far as I can tell) and find that this behaviour only happens with R:Base. With RRBYW19 the start time is about 4 seconds on the old machine and about 24 seconds on the new one. (With CAD files the newer machine opens files faster than the old one, as it should.) I was wondering if anyone has any suggestions as to what may be causing this significant difference in performance. (According to a disc test I ran on both, the transfer rates on the new laptop are 1500 MB/sec (write) and 3000 MB/sec (read), while the rates are significantly lower on the old machine - all SSDs.)
Is this likely to be due to the AV software, and if it is, can I stop WD scanning RX? files ? (I tried installing BD on the new machine but that created a few blue screens so I gave that idea up.) Any suggestions would be welcome. Thank you. John Docherty -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
