Razzak, Thank you for the clarification. However I may add the extensions as well because we still have machines on our network that open the application faster than others.
Jan -----Original Message----- From: "A. Razzak Memon" <[email protected]> To: [email protected] Date: Mon, 29 Jan 2018 12:15:35 -0500 Subject: Re: [RBASE-L] - Speed Difference - Same APP Different Laptops & AV Software Jan, No. That was just an example for all possible folders and extensions where the executables could be in one folder, and the applications, and DLLs could be in different folder(s). However, if everything is in one folder, such as compiled applications and projects as in your case, excluding the folder should take care of all files underneath that folder. Very Best R:egards, Razzak At 12:07 PM 1/29/2018, jan johansen wrote: >Ok, so this brings up a further question. In the >old days we could just exclude the working directory. >So ... now we need exclude the extensions? > > >-----Original Message----- >From: "A. Razzak Memon" <[email protected] [mailto:razzak%40rbase.com]> >To: [email protected] [mailto:rbase-l%40googlegroups.com] >Date: Mon, 29 Jan 2018 08:54:15 -0500 >Subject: Re: [RBASE-L] - Speed Difference - Same >APP Different Laptops & AV Software > >John, > >Make sure to configure the AV software with the exclusions as follows: > >. \RBTI\RBGXE\*.* >. RBENGINE*.dll >. RBGX*.dll >. RStyleX.dll >. OterroX*.dll -- if applicable >. RBENGINE*.cfg >. OterroX*.cfg -- if applicable >. RSyleX.cfg >. Compiledappname.exe >. *.dat >. *.eep >. *.rbc >. *.rbm >. *.rgw >. *.rff >. *.rmd >. *.rx* > >Hope it helps! > >Very Best R:egards, > >Razzak > > >At 04:38 AM 1/29/2018, John Docherty wrote: > > >I am running the same application on two > >different laptops, both Windows 10 64 Bit, > >R:Base XE, one with Bitdefender (old machine) > >and the other (new) with Windows Defender. I > >find that with the same RX% files on both > >machines, the starting screen (an external form) > >will be displayed within about 5 seconds on the > >old laptop, while on the new one it takes in > >excess of 20 seconds. I have the same > >configuration settings (as far as I can tell) > >and find that this behaviour only happens with > >R:Base. With RRBYW19 the start time is about 4 > >seconds on the old machine and about 24 > >seconds on the new one. (With CAD files the > >newer machine opens files faster than the old > >one, as it should.)  I was wondering if > >anyone has any suggestions as to what may be > >causing this significant difference in > >performance. (According to a disc test I ran on > >both, the transfer rates on the new laptop are > >1500 MB/sec (write) and 3000 MB/sec (read), > >while the rates are significantly lower on the old machine - all SSDs.) > > > >Is this likely to be due to the AV software, and > >if it is, can I stop WD scanning RX? files > >? (I tried installing BD on the new machine > >but that created a few blue screens so I gave that idea up.) > > > >Any suggestions would be welcome. > >-- >For group guidelines, visit ><http://www.rbase.com/support/usersgroup_guidelines.php [http://www.rbase.com/support/usersgroup_guidelines.php]>http://www.rbase.com/support/usersgroup_guidelines.php [http://www.rbase.com/support/usersgroup_guidelines.php] >--- >You received this message because you are >subscribed to the Google Groups "RBASE-L" group. >To unsubscribe from this group and stop >receiving emails from it, send an email to ><mailto:rbase-l%2Bunsubscribe%40googlegroups.com>[email protected] > [mailto:rbase-l%2Bunsubscribe%40googlegroups.com]. >For more options, visit ><https://groups.google.com/d/optout [https://groups.google.com/d/optout]>https://groups.google.com/d/optout [https://groups.google.com/d/optout]. > >-- >For group guidelines, visit ><http://www.rbase.com/support/usersgroup_guidelines.php [http://www.rbase.com/support/usersgroup_guidelines.php]>http://www.rbase.com/support/usersgroup_guidelines.php [http://www.rbase.com/support/usersgroup_guidelines.php] >--- >You received this message because you are >subscribed to the Google Groups "RBASE-L" group. >To unsubscribe from this group and stop >receiving emails from it, send an email to ><mailto:[email protected] [mailto:rbase-l%2Bunsubscribe%40googlegroups.com]>[email protected] [mailto:rbase-l%2Bunsubscribe%40googlegroups.com]. >For more options, visit ><https://groups.google.com/d/optout [https://groups.google.com/d/optout]>https://groups.google.com/d/optout [https://groups.google.com/d/optout]. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php [http://www.rbase.com/support/usersgroup_guidelines.php] --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected] [mailto:rbase-l%2Bunsubscribe%40googlegroups.com]. For more options, visit https://groups.google.com/d/optout [https://groups.google.com/d/optout]. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
