Razzak, A reboot seemed to be required after I added the exclusions. All working as it should now.
Thank you for your help. Regards John Docherty On Monday, January 29, 2018 at 10:38:04 PM UTC+13, John Docherty wrote: > > I am running the same application on two different laptops, both Windows > 10 64 Bit, R:Base XE, one with Bitdefender (old machine) and the other > (new) with Windows Defender. I find that with the same RX% files on both > machines, the starting screen (an external form) will be displayed within > about 5 seconds on the old laptop, while on the new one it takes in excess > of 20 seconds. I have the same configuration settings (as far as I can > tell) and find that this behaviour only happens with R:Base. With RRBYW19 > the start time is about 4 seconds on the old machine and about 24 seconds > on the new one. (With CAD files the newer machine opens files faster than > the old one, as it should.) I was wondering if anyone has any suggestions > as to what may be causing this significant difference in performance. > (According to a disc test I ran on both, the transfer rates on the new > laptop are 1500 MB/sec (write) and 3000 MB/sec (read), while the rates are > significantly lower on the old machine - all SSDs.) > > Is this likely to be due to the AV software, and if it is, can I stop WD > scanning RX? files ? (I tried installing BD on the new machine but that > created a few blue screens so I gave that idea up.) > > Any suggestions would be welcome. > > Thank you. > > John Docherty > -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
