Razzak, Thanks for your prompt reply. I have tried adding those files and some folders to the Windows Defender exclusions but no improvement so far. I will keep trying and I will let you know when this is resolved.
Regards John Docherty On Tuesday, January 30, 2018 at 2:54:20 AM UTC+13, A. Razzak Memon wrote: > > John, > > Make sure to configure the AV software with the exclusions as follows: > > . \RBTI\RBGXE\*.* > . RBENGINE*.dll > . RBGX*.dll > . RStyleX.dll > . OterroX*.dll -- if applicable > . RBENGINE*.cfg > . OterroX*.cfg -- if applicable > . RSyleX.cfg > . Compiledappname.exe > . *.dat > . *.eep > . *.rbc > . *.rbm > . *.rgw > . *.rff > . *.rmd > . *.rx* > > Hope it helps! > > Very Best R:egards, > > Razzak > > > At 04:38 AM 1/29/2018, John Docherty wrote: > > >I am running the same application on two > >different laptops, both Windows 10 64 Bit, > >R:Base XE, one with Bitdefender (old machine) > >and the other (new) with Windows Defender. I > >find that with the same RX% files on both > >machines, the starting screen (an external form) > >will be displayed within about 5 seconds on the > >old laptop, while on the new one it takes in > >excess of 20 seconds. I have the same > >configuration settings (as far as I can tell) > >and find that this behaviour only happens with > >R:Base. With RRBYW19 the start time is about 4 > >seconds on the old machine and about 24 > >seconds on the new one. (With CAD files the > >newer machine opens files faster than the old > >one, as it should.)  I was wondering if > >anyone has any suggestions as to what may be > >causing this significant difference in > >performance. (According to a disc test I ran on > >both, the transfer rates on the new laptop are > >1500 MB/sec (write) and 3000 MB/sec (read), > >while the rates are significantly lower on the old machine - all SSDs.) > > > >Is this likely to be due to the AV software, and > >if it is, can I stop WD scanning RX? files > >? (I tried installing BD on the new machine > >but that created a few blue screens so I gave that idea up.) > > > >Any suggestions would be welcome. > > -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
