Peter White in a thread on his forum recently opined Schwalbe's higher recommended psi is too high by 10. He did not say anything about underinflation that I am aware of.
Like you, I would be concerned about going as low as 30 on a smaller rim. On May 15, 12:00 pm, Jim Thill - Hiawatha Cyclery <[email protected]> wrote: > I'd go by what's printed on the tire. I always rode mine at approx > 40-55 psi on Velocity Dyad rims, and I'm pretty sure I experimented as > low as 20-30 psi with no obvious problems. I think 70 is too much for > my tastes, rides rough, etc. I'd also shy away from going down to 30 > on narrower rims. But, please don't listen to me. Get the tires and > experiment to figure out what works for you. > > Jim > > On May 15, 10:31 am, Garth <[email protected]> wrote: > > > > > Thanks for the replies. > > > Jim.... I could use some clarification. The XR's lowest pressure > > rating is different from the Schwalbe North America and the Schwalbe > > Global sites. What is the lowest pressure for the 700x50's? The North > > America site says 45-70, the Global says 30-70 , which would be the > > same as the Big Apples. Can they both be run at 30 psi?- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
