On Fri, May 15, 2009 at 11:40 AM, JoelMatthews <[email protected]> wrote:
> > Peter White in a thread on his forum recently opined Schwalbe's higher > recommended psi is too high by 10. He did not say anything about > underinflation that I am aware of. > > Like you, I would be concerned about going as low as 30 on a smaller > rim. > > On May 15, 12:00 pm, Jim Thill - Hiawatha Cyclery > <[email protected]> wrote: > > I'd go by what's printed on the tire. I always rode mine at approx > > 40-55 psi on Velocity Dyad rims, and I'm pretty sure I experimented as > > low as 20-30 psi with no obvious problems. I think 70 is too much for > Again, for 60s, both 622 and 559, I've run the front as low as 15 (by mistake) on 22 (559) and 24 (622) mm rims; no problems. Generally I've chosen 20 front, 25 rear. This does cause sidewall flop that you notice on pavement (not on dirt), but I've never had a pinch flat. 170 lb bare nekkid. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
