Hi, That would be my bike. I did change over to a Phil bottom bracket, now let me think; half of 115 is say 57 +3mm of spacers is 60 and that doubled would be 120mm. I think I ended up with a 122, to set the bike up symerrical, but I'm not a low Q nut as my knees like it a little wider than some.
Joe On Thursday, June 11, 2009, Garth <[email protected]> wrote: > > That TA crank needs a 115mm BB, according to some info from Sheldon > Browns site. This gives a very narrow Q of 134mm. You could go wider > on the BB, but not narrower. These arms are straight. No bow. > > What is the current length of your spindle? > > I don't know the Saluki well enough, but a double of this crank may > not have room to clear the small rings. I found this photo of > one. . . . it would be tight with a 30t ring. You may need a > slightly longer BB. > http://www.cyclofiend.com/cc/2006/cc117-joeszokoli0506.html > > Isn't customizing fun? :) > > > -- Joe Szokoli New York City --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
