It doesn't appear to me that the chain drag would be that noticeable......are you using a regular 8-9 speed chain?
On May 8, 11:58 am, Ron MH <visio...@gmail.com> wrote: > This question is to all. How does the fixed gear side chainline work > out with the various combinations you use? I ask because the fixed > gear chainline on my Quickbeam sucks and the drag/lack of efficiency > is easy to feel. I'm running the stock bashguard/40/32 Sugino triple > combination and a 16t fixed cog in back. The chainline on the 40x16 > fixed combination is more than 5mm off (the cog being inboard of the > chainring). And the fixed setup is much more "draggy" than the 40x16 > freewheel combination on the other side when using the 16-19 White > Industries DOS freewheel. Of course, that's because the DOS freewheel > places the 16t cog further outboard. The whole issue has me about to > ditch the Sugino triple in favor of a decent single speed crankset. > > Ron > > On May 8, 8:50 am, A D <deguzman.al...@gmail.com> wrote: > > > > > > > > > On my Simpleone I have a dos 16/19 on the freewheel side and a 17/19 > > surly dingle cog on the fixed side. In front I have 44/48 rings on > > the front. I use the 48/16 when I commute and ride down to Rivendell > > and change gears to 44/19 when I go back home which is mostly > > uphill. I usually flip to the fixed side on weekend rides when I > > don't have anywhere to be. > > > I haven't tried the extremes of the gears but the dropouts on my > > prototype appear long enough. > > > There is just something about the Qb/SO that feels so right. I can't > > figure it out but it has me considering picking up an AHH even though > > I have an Ebisu AR. > > > On May 7, 6:54 pm, Robert Harrison <rfharri...@gmail.com> wrote: > > > > My QB has a 40/32 in front and the 16/19 in the rear. It also has a solo > > > 22 back the which does come in handy when laden down with camping gear > > > and facing a couple of hills around here. In town I tend to run 40/19 > > > because I can get "off the line" faster in traffic. Once out on the open > > > road it's back to 40/16. > > > > Not thinking about what gear I'm in is great. During the week I'm in > > > commuter mode, on weekend it's open road mode and maybe once a quarter I > > > camp. > > > > Aloha, > > > > Bob > > > > Sent from my iPad > > > > On May 7, 2011, at 11:00 AM, newenglandbike <matthiasbe...@gmail.com> > > > wrote: > > > > > It is a cool concept, made even cooler, IMHO, by the copious length of > > > > the QB dropout. It's about 2". So, whereas with the WI 'double/ > > > > double', you get to choose between front rings 3-teeth apart, the > > > > extra length of the Rivendell dropout gives you a mind-boggling span > > > > of 8 teeth to play with on the front rings-- and with the 16/19 in the > > > > rear, you can make that up to 11 teeth diff up front. Dang. > > > > > So basically, you can run a 16/19 in the rear, and a 40/32 double up > > > > front, which comes stock with the new Simple One I believe. Then you > > > > put a 22t ACS f/w on the other side, and suddenly derailleurs start to > > > > look quaint.* > > > > > -Matt > > > > > *OK not really > > > > > On May 7, 4:50 pm, andrew hill <neurod...@gmail.com> wrote: > > > >> Has anyone run a White Industries "Double/Double" drivetrain setup on > > > >> their Quickbeam? > > > >> Or maybe has plans to on their SimpleOne? > > > > >> Seems like a nice combination - rear Duo freewheel of 16/19, and front > > > >> of either 38/35 or 34/31. > > > > >> They suggest the 38/35 for a 26" mtn bike, and the 38/35 for a > > > >> 29'er... but it seems to me that the 38/35 would be best for a 700c > > > >> mostly on-road riding bike. > > > > >> Am I confused? e.g. 38/16 and 35/19 seem like they would be better > > > >> than 31/19 and 34/16... > > > > >> Anyone try this yet, or have a thought as to why this wouldn't be a > > > >> great idea? :) > > > > >> Best, > > > >> andrew > > > > > -- > > > > You received this message because you are subscribed to the Google > > > > Groups "RBW Owners Bunch" group. > > > > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > > > > To unsubscribe from this group, send email to > > > > rbw-owners-bunch+unsubscr...@googlegroups.com. > > > > For more options, visit this group > > > > athttp://groups.google.com/group/rbw-owners-bunch?hl=en. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
