I am going to go with an ISU-122 once I plan everything out, but I can't find a good place for dimensions so I can scale it and find parts that will fit the scale.
I think for treads I might try to do an inside out a V belt set up I could use a few to get the width, and have them with the notches to provide traction. I don't know if it would work though, I might have to somehow connect one on the inside (the non notched side) to provide traction to the drive pulley. If that will not work, I might go with a hinge track, or (most likely) a treadmill belt system. I was looking around online after reading an article that voltage/ current requirements are closer to middleweight Battle Bots. I looked online and found the robot marketplace. I was wondering if 2 SyRen 25A Regenerative Motor Driver and 2 DeWalt 18V New Style Drill Motor with the matching gearbox would work for the driving. For turret elevation, I am going to use the screw jack method I saw in one of the tanks ( I don't remember which one) and maybe another DeWalt drill motors to operate it, unless that would be too fast for accurate and precision adjustments. For the paintball marker I'm thinking about just finding a cheap one on eBay. The .68 caliber is the cheapest and most common to find around where I live, so that would be the best caliber for me to use. I do need some help finding the best choice for me, and how to disassemble it. SyRen 25A Regenerative Motor Driver http://www.robotmarketplace.com/products/0-SYREN25.html DeWalt 18V New Style Drill Motor http://www.robotmarketplace.com/products/BP396505-22.html DeWalt 3 speed Gearbox http://www.robotmarketplace.com/products/BP397892-05.html -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
