G'day Wrenches,
I'm looking for an additional charger(s) to increase the charging capacity
from the back-up 12 kW Onan generator into the 1200 Ah battery. Right now the
generator's full potential output is limited by the charging capacity of the
two VFX3648's which have a max charge output of 45A each.
The idea here is to use the generator to its full charging capacity when it is
running, taking in to consideration that the generator will feed any AC loads
before charging the battery.
Iota and IBE chargers have been suggested. Any comments on these or other
makes?
Do all generator types (diesel, propane, LNG, gasoline) run more efficiently
when fully loaded? or is this only the case with diesel (so i've heard)?
thanks,benn
DayStar Renewable Energy Inc. [email protected] HAVE A SUNNY DAY
CONFIDENTIALITY NOTICE: This email, including any attachments, contains
information from DayStar Renewable Energy Inc. and/or its affiliates, which may
be confidential or privileged. The information is intended to be for the use of
the individual or entity named above. If you are not the intended recipient, be
aware that any disclosure, copying, distribution or use of the contents of this
information is prohibited. If you have received this email in error, please
notify the sender immediately by "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
_________________________________________________________________
MSN Dating: Find someone special. Start now.
http://go.microsoft.com/?linkid=9734384_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
