Hi Jason, Have you rebooted it?
I’ve found that usually unplugging and replugging and possibly turning the CC on/off works. Jay Peltz Power > On Apr 16, 2020, at 1:03 PM, Jason Szumlanski > <[email protected]> wrote: > > > I am working with a client (not my install) with a XW6048 and MPPT 80 600 > with a SCP. The SCP is not showing the MPPT in the setup menu. I am able to > access the system settings and XW configuration, but not the MPPT settings. > It is connected via Xanbus in this manner: > > SCP -> MPPT -> XW > > So the MPPT is in the middle and is passing through the XW signal just fine. > > The MPPT also has a red error light illuminated, but it is charging the > battery (positive current measured via clamp meter). > > Any ideas? > > Thanks, > > Jason Szumlanski > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
