There is just as much shielding inside Schneider, Outback or most any electronics that are designed for networking. It is Engineered in. Canbus, modbus, ">DAVE ANGELINI OFFGRID SOLAR
"we go where powerlines don't" http://members.sti.net/offgridsolar/ [1] e-mail [email protected] [2] text 209 813 0060 On Fri, 17 Apr 2020 10:03:10 -0400, Tump wrote: One can use shielded ends but there is NO shielding in place for the connector inside the Schneider components. The most important thing is either enclosing the com cables inside the shielding tin inside the PDP or wire the cables outside of the devices. They (Schneider) had suggested 6' cables there are folks that say that the supplied cables from Sch. are of poor quality. I have the config tool that in these situations really does help, having my own SCP, installing updated firmware, turning everything off & waiting few mins. + unplugging border-left:#1010ff 2px solid; margin-left:5px; width:100%"> On Apr 17, 2020, at 8:50 AM, Kirk Herander wrote: So you terminate the shield somehow outside of the RJ45 connector? On 4/16/2020 9:01:53 PM, Jeff Clearwater wrote: When I did my cable swap and reconfiguration that fixed it I also was more careful to route the xanbus cables away from the batter/inverter cables - thinking that perhaps induction was the culprit. As I have an rj45 crimp tool and some shielded CAT5e in the truck I think I'll just make up my own cables in the future after spending way more time than that troubleshooting. Best of luck! jc Jason Szumlanski wrote on 4/16/20 3:00 PM: I tried swapping the cables for the XW and MPPT. After reboot the XW continued to show up on the SCP but the MPPT did not. I didn't have another cable, but this suggests the cable is not the problem. I didn't think to change the order, however. On Thu, Apr 16, 2020 at 5:57 PM Jeff Clearwater wrote: Hey Jason, I had a SCP xanbus system once that refused to show a component - The fix was replacing the cheap ethernet wires that schneider provided with better cables and/or changing the order of the components in the series comm string. not sure which did it as I did both changes at once but I do suspect those white cables. Best, Jeff Jason Szumlanski wrote on 4/16/20 1:03 PM: I am working with a client (not my install) with a XW6048 and MPPT 80 600 with a SCP. The SCP is not showing the MPPT in the setup menu. I am able to access the system settings and XW configuration, but not the MPPT settings. It is connected via Xanbus in this manner: SCP -> MPPT -> XW So the MPPT is in the middle and is passing through the XW signal just fine. The MPPT also has a red error light illuminated, but it is charging the battery (positive current measured via clamp meter). Any ideas? Thanks, Jason Szumlanski _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] [6] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [7] List-Archive: http://www.mail-archive.com/[email protected]/maillist.html [8] List rules font-size: inherit; padding: 0px; color: #505050;">413-559-9763 ~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] [14] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [15] List-Archive: http://www.mail-archive.com/[email protected]/maillist.html [16] List rules font-size: inherit; padding: 0px; color: #505050;">413-559-9763 ~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] [21] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [22] List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules border-left:#1010ff 2px solid; margin-left:5px; width:100%"> WWW.SWNL.NET [23] Solarwinds Northernlights _ _ _ SERVING MID COAST MAINE "> _ 207-832-7574 CL. 610-517-8401 _ _ __BLAIR "TUMP" MAY_ ******** MAINE'S CHARTER ******** _ __ NABCEP "CERTIFIED PV INSTALLER"_ ******** MAINE'S CHARTER ******** _ TRACE XANTREX "CERTIFIED" DEALER / INSTALLER"_ Links: ------ [1] http://members.sti.net/offgridsolar/ [2] mailto:[email protected] [3] mailto:[email protected] [4] mailto:[email protected] [5] mailto:[email protected] [6] mailto:[email protected] [7] https://mailtrack.io/trace/link/b90ca785a525b3990337afa8e4de7b8f58299dda?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=a218969f1c881b8f [8] https://mailtrack.io/trace/link/782ab5370a2dc90df34131154f96595de5604ebc?url=http%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2Fmaillist.html&userId=1613865&signature=6b59dfe40f1af8f5 [9] https://mailtrack.io/trace/link/f342e1145ed8bd312cd51c8d9538e7d40534372f?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=aaed0000f561c13d [10] https://mailtrack.io/trace/link/b3aac2fd00cbe275bdd68323bbd3326fd7073c2c?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=b7fe990e7c6ebc5d [11] https://mailtrack.io/trace/link/2b6554cfd6030cb29629ba73171aee87bce557b7?url=https%3A%2F%2Fwww.linkedin.com%2Fin%2Fjeff-clearwater-0622a312%2F&userId=1613865&signature=b502f02a345c328a [12] https://mailtrack.io/trace/link/eaf54fba7350e494de8685771adb3c8b610c0ce2?url=http%3A%2F%2Fwww.villagelab.net&userId=1613865&signature=a7fed555763946d9 [13] https://mailtrack.io/trace/link/f35711ff79b27a2638bcbd392a1b2d9a09c7df5e?url=http%3A%2F%2Fwww.villagepowerdesign.com&userId=1613865&signature=aa4a4ddfbb35eb35 [14] mailto:[email protected] [15] http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [16] http://www.mail-archive.com/[email protected]/maillist.html [17] http://www.re-wrenches.org/etiquette.htm [18] http://www.members.re-wrenches.org/ [19] https://www.linkedin.com/in/jeff-clearwater-0622a312/ [20] http://www.villagepowerdesign.com/ [21] mailto:[email protected] [22] http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [23] http://webmail.sti.net/blocked::http://www.swnl.net/%22%20%5Co%20%22blocked::http://www.swnl.net/
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
