Thanks for the tips. I'll do some more tinkering next time. It's a solid 90 minutes from my office so I'm not sure when I'll make it back. I need to tie it in with another service call in the area to make it work.
On Thu, Apr 16, 2020, 9:01 PM Jeff Clearwater <je...@villagepowerdesign.com> wrote: > When I did my cable swap and reconfiguration that fixed it I also was more > careful to route the xanbus cables away from the batter/inverter cables - > thinking that perhaps induction was the culprit. As I have an rj45 crimp > tool and some shielded CAT5e in the truck I think I'll just make up my own > cables in the future after spending way more time than that troubleshooting. > > Best of luck! > > jc > > Jason Szumlanski wrote on 4/16/20 3:00 PM: > > I tried swapping the cables for the XW and MPPT. After reboot the XW > continued to show up on the SCP but the MPPT did not. I didn't have another > cable, but this suggests the cable is not the problem. I didn't think to > change the order, however. > > > > > On Thu, Apr 16, 2020 at 5:57 PM Jeff Clearwater <je...@villagelab.net> > wrote: > >> Hey Jason, >> >> I had a SCP xanbus system once that refused to show a component - The fix >> was replacing the cheap ethernet wires that schneider provided with better >> cables and/or changing the order of the components in the series comm >> string. not sure which did it as I did both changes at once but I do >> suspect those white cables. >> >> Best, >> >> Jeff >> >> Jason Szumlanski wrote on 4/16/20 1:03 PM: >> >> I am working with a client (not my install) with a XW6048 and MPPT 80 600 >> with a SCP. The SCP is not showing the MPPT in the setup menu. I am able to >> access the system settings and XW configuration, but not the MPPT settings. >> It is connected via Xanbus in this manner: >> >> SCP -> MPPT -> XW >> >> So the MPPT is in the middle and is passing through the XW signal just >> fine. >> >> The MPPT also has a red error light illuminated, but it is charging the >> battery (positive current measured via clamp meter). >> >> Any ideas? >> >> Thanks, >> >> Jason Szumlanski >> >> >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & >> settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> <https://mailtrack.io/trace/link/b90ca785a525b3990337afa8e4de7b8f58299dda?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=a218969f1c881b8f> >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> <https://mailtrack.io/trace/link/782ab5370a2dc90df34131154f96595de5604ebc?url=http%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2Fmaillist.html&userId=1613865&signature=6b59dfe40f1af8f5> >> >> List rules & etiquette:www.re-wrenches.org/etiquette.htm >> <https://mailtrack.io/trace/link/f342e1145ed8bd312cd51c8d9538e7d40534372f?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=aaed0000f561c13d> >> >> Check out or update participant bios:www.members.re-wrenches.org >> <https://mailtrack.io/trace/link/b3aac2fd00cbe275bdd68323bbd3326fd7073c2c?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=b7fe990e7c6ebc5d> >> >> >> -- >> ~~~~~~~~~~~ >> Jeff Clearwater >> VillageLab >> Village Power Design >> linkedin >> <https://mailtrack.io/trace/link/2b6554cfd6030cb29629ba73171aee87bce557b7?url=https%3A%2F%2Fwww.linkedin.com%2Fin%2Fjeff-clearwater-0622a312%2F&userId=1613865&signature=b502f02a345c328a> >> www.villagelab.net >> <https://mailtrack.io/trace/link/eaf54fba7350e494de8685771adb3c8b610c0ce2?url=http%3A%2F%2Fwww.villagelab.net&userId=1613865&signature=a7fed555763946d9> >> www.villagepowerdesign.com >> <https://mailtrack.io/trace/link/f35711ff79b27a2638bcbd392a1b2d9a09c7df5e?url=http%3A%2F%2Fwww.villagepowerdesign.com&userId=1613865&signature=aa4a4ddfbb35eb35> >> skype - jclearwater >> zoom by request >> cell - 413-559-9763 >> ~~~~~~~~~~~~~~~~~~~~~~~ >> > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & > settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette:www.re-wrenches.org/etiquette.htm > > Check out or update participant bios:www.members.re-wrenches.org > > > -- > ~~~~~~~~~~~ > Jeff Clearwater > Village Power Design > linkedin <https://www.linkedin.com/in/jeff-clearwater-0622a312/> > www.villagepowerdesign.com > cell - 413-559-9763 > ~~~~~~~~~~~~~~~~~~~~~~~ >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
