When I did my cable swap and reconfiguration that fixed it I also was more careful to route the xanbus cables away from the batter/inverter cables - thinking that perhaps induction was the culprit.  As I have an rj45 crimp tool and some shielded CAT5e in the truck I think I'll just make up my own cables in the future after spending way more time than that troubleshooting.

Best of luck!

jc

Jason Szumlanski wrote on 4/16/20 3:00 PM:
I tried swapping the cables for the XW and MPPT. After reboot the XW continued to show up on the SCP but the MPPT did not. I didn't have another cable, but this suggests the cable is not the problem. I didn't think to change the order, however.

*

*


On Thu, Apr 16, 2020 at 5:57 PM Jeff Clearwater <[email protected] <mailto:[email protected]>> wrote:

    Hey Jason,

    I had a SCP xanbus system once that refused to show a component -
    The fix was replacing the cheap ethernet wires that schneider
    provided with better cables and/or changing the order of the
    components in the series comm string.  not sure which did it as I
    did both changes at once but I do suspect those white cables.

    Best,

    Jeff

    Jason Szumlanski wrote on 4/16/20 1:03 PM:
    I am working with a client (not my install) with a XW6048 and
    MPPT 80 600 with a SCP. The SCP is not showing the MPPT in the
    setup menu. I am able to access the system settings and XW
    configuration, but not the MPPT settings. It is connected via
    Xanbus in this manner:

    SCP -> MPPT -> XW

    So the MPPT is in the middle and is passing through the XW
    signal just fine.

    The MPPT also has a red error light illuminated, but it is
    charging the battery (positive current measured via clamp meter).

    Any ideas?

    Thanks,

    Jason Szumlanski

    *

    *


    _______________________________________________
    List sponsored by Redwood Alliance

    List Address:[email protected]
    <mailto:[email protected]>

    Change listserver email address & settings:
    http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
    
<https://mailtrack.io/trace/link/b90ca785a525b3990337afa8e4de7b8f58299dda?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=a218969f1c881b8f>

    
List-Archive:http://www.mail-archive.com/[email protected]/maillist.html
    
<https://mailtrack.io/trace/link/782ab5370a2dc90df34131154f96595de5604ebc?url=http%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2Fmaillist.html&userId=1613865&signature=6b59dfe40f1af8f5>

    List rules & etiquette:
    www.re-wrenches.org/etiquette.htm
    
<https://mailtrack.io/trace/link/f342e1145ed8bd312cd51c8d9538e7d40534372f?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=aaed0000f561c13d>

    Check out or update participant bios:
    www.members.re-wrenches.org
    
<https://mailtrack.io/trace/link/b3aac2fd00cbe275bdd68323bbd3326fd7073c2c?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=b7fe990e7c6ebc5d>


-- ~~~~~~~~~~~
    Jeff Clearwater
    VillageLab
    Village Power Design
    linkedin
    
<https://mailtrack.io/trace/link/2b6554cfd6030cb29629ba73171aee87bce557b7?url=https%3A%2F%2Fwww.linkedin.com%2Fin%2Fjeff-clearwater-0622a312%2F&userId=1613865&signature=b502f02a345c328a>

    www.villagelab.net
    
<https://mailtrack.io/trace/link/eaf54fba7350e494de8685771adb3c8b610c0ce2?url=http%3A%2F%2Fwww.villagelab.net&userId=1613865&signature=a7fed555763946d9>
    www.villagepowerdesign.com
    
<https://mailtrack.io/trace/link/f35711ff79b27a2638bcbd392a1b2d9a09c7df5e?url=http%3A%2F%2Fwww.villagepowerdesign.com&userId=1613865&signature=aa4a4ddfbb35eb35>
    skype - jclearwater
    zoom by request
    cell - 413-559-9763
    ~~~~~~~~~~~~~~~~~~~~~~~



_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org


--
~~~~~~~~~~~
Jeff Clearwater
Village Power Design
linkedin <https://www.linkedin.com/in/jeff-clearwater-0622a312/>
www.villagepowerdesign.com <http://www.villagepowerdesign.com>
cell - 413-559-9763
~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to